×
- Hello
- Login or Register
- Quick Links
- Live Chat
- Track Order
- Parts Availability
- RMA
- Help Center
- Contact Us
- Shop for
- BMW Parts
- BMW Accessories
My Garage
My Account
Cart
Genuine BMW 325i Rack and Pinions
Steering Rack- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orSeries
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
7 Rack and Pinions found
BMW 325i Exchange Hydro Steering Gear
Part Number: 32136753438$2072.20 MSRP: $2196.71You Save: $124.51 (6%)Ships in 1-3 Business Days
BMW 325i Exchange Hydro Steering Gear
Part Number: 32136755065$2907.19 MSRP: $3138.16You Save: $230.97 (8%)Ships in 1-3 Business Days
BMW 325i Exchange Hydro Steering Gear
Part Number: 32106777463$2279.79 MSRP: $2400.89You Save: $121.10 (6%)Ships in 1-3 Business Days
BMW 325i Exchange Hydro Steering Gear
Part Number: 32131096280$1521.32 MSRP: $1982.29You Save: $460.97 (24%)Ships in 1-3 Business Days
BMW 325i Exchange Hydro Steering Gear
Part Number: 32131097316$1591.29 MSRP: $1717.71You Save: $126.42 (8%)Ships in 1-3 Business Days
BMW 325i Rack and Pinions
Developed by BMW, the 325i Rack and Pinions helps direct the wheels accurately with the rotating steering wheel. Housed within a robust tube secured to the chassis, the rack gear connects to tie rods, which then push the steering knuckles. The pinion gear, operated by the column shaft, slides the rack either left or right whenever the wheel is turned. Over the production years, engineers outfitted various trims of the BMW 325i with one of two styles of Rack and Pinions, straight cut gears or helical cut gears. Straight units require less effort, remain cooler, and transmit higher torque per ratio, while helical units, although cheaper, can operate hotter, exert more side load, and wear sooner. This Rack and Pinions provide rapid feedback with virtually no backlash. Initially, hydraulic Rack and Pinions fitted with electric assistance were subsequently adopted to allow a light steering effort without removing the feel. This is a blend that is essential for the classic BMW handling. No matter how you assist, all BMW 325i Rack and Pinions focus on direct response, ensuring every 325i tracks true through winding roads.
If you are looking for OEM BMW 325i Rack and Pinions, we highly recommend to shop with us. Not only do we offer budget friendly prices, but we also provide fast delivery. In addition, we have a hassle-free return policy on all genuine BMW 325i Rack and Pinions that come backed by the manufacturer's warranty.
BMW 325i Rack and Pinions Parts Questions & Experts Answers
- Q:How to replace the front steering gear with Rack and Pinions on BMW 325i?Posted by Evelyn S.A:Block the rear wheels, apply the parking brake, and raise the front of the vehicle, supporting it on jack stands. Remove both front wheels and the engine under-shield. Set the steering straight and engage the steering lock. If your model has electric power steering, disconnect the negative battery cable. Remove the nuts securing the outer tie-rod ends to the steering knuckles, releasing the ball joints by tapping their ends with a soft-faced hammer. Mark the alignment between the intermediate shaft coupling and the rack and pinions. Remove the coupling pinch bolt. If you have conventional power steering, clamp both the supply and return hoses near the reservoir to minimize fluid loss, marking the unions for correct positioning on reassembly. Remove the feed and return pipe union bolts from the rack and pinions housing and remove the sealing washers. Be ready for fluid spillage and plug the ends of the pipes and rack and pinions to prevent leakage and contamination. Release the power steering pipes from their retaining clips. For electric power steering, release the rack and pinions wiring harness and disconnect the plug from the motor. Loosen and remove the rack and pinions mounting bolts, discarding them as new ones will be needed for reinstallation. Examine the rack and pinions for wear or damage, ensuring the rack moves freely. If the rack and pinions assembly is faulty, it must be replaced, as only the boots, the outer tie-rod ends, or the tie-rod shafts can be replaced individually. For installation, position the rack and pinions with new mounting bolts, tighten them to the correct torque. For conventional power steering, use new sealing washers for the pipe hose unions and tighten the union bolts. For electric models, reconnect the motor electrical connector. Align the previously made marks and connect the intermediate shaft coupling to the rack and pinions with a new clamp bolt. Insert the outer tie-rod ends into the steering knuckles using new nuts. Reattach the wheels and engine under-shield, lower the vehicle, and tighten the wheel bolts. For conventional power steering, bleed the hydraulic system. It's essential to check the front wheel alignment soon. If you have active steering or a new rack and pinions was installed, ensure the steering angle sensor calibration is checked with BMW diagnostic equipment by a professional.Answered by BMW Parts Specialist Javier / Feb 15, 2024
Browse by Year
2006 Rack and Pinions 2005 Rack and Pinions 2004 Rack and Pinions 2003 Rack and Pinions 2002 Rack and Pinions 2001 Rack and Pinions 1995 Rack and Pinions 1994 Rack and Pinions 1993 Rack and Pinions 1992 Rack and Pinions 1991 Rack and Pinions 1990 Rack and Pinions 1989 Rack and Pinions 1988 Rack and Pinions 1987 Rack and Pinions