Where is the brake light switch located and how do you remove and install it on BMW 328i?

The brake light switch is located on the pedal bracket behind the instrument panel. To remove it, loosen and remove the retaining bolts securing the driver's side knee bolster panel, unclip the panel, and disconnect any electrical connectors. Reach up behind the instrument panel and disconnect the wiring connector from the switch. Pull the switch from the mounting, and if necessary, depress the clips and withdraw the switch mounting from the pedal bracket. To install the switch, fully depress the brake pedal and hold it down, then install the mount and maneuver the switch into position. Push the switch fully into position and slowly release the brake pedal to allow for automatic adjustment. Reconnect the electrical connector and check the operation of the brake lights. Finally, install the driver's side knee bolster panel.

Genuine BMW 328i Brake Light Switch

Brake Lamp Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Series

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Brake Light Switches found

View related parts
BMW 328i Stop Light Switch
Part Number: 61316967601
$36.19 MSRP: $45.02
You Save: $8.83 (20%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Replaces: 61-31-6-908-787, 61-31-6-957-151, 61-31-0-141-216, 61-31-0-300-846, 61-31-6-908-786, 61-31-4-105-242, 61-31-0-141-214, 61-31-0-406-809, 61-31-4-114-226, 61-31-4-114-227, 61-31-6-928-031, 61-31-0-398-202
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 2007-2013 BMW 328i | Convertible N51 Engine(E93), Convertible N52 Engine(E93), Coupe N51 Engine(E92), Coupe N52 Engine(E92), Sedan N51 Engine(E90), Sedan N52 Engine(E90), Wagon(E91)
- 1999-2000 BMW 328i | Sedan(E46)
View related parts
BMW 328i Stop Light Switch
Part Number: 35006876896
$45.66 MSRP: $56.80
You Save: $11.14 (20%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Parking Brake Switch, Stoplamp Switch, Switch
- Replaces: 35-00-6-876-897, 61-31-9-240-076
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 2012-2016 BMW 328i | N20 Engine(F30), N26 Engine(F30), Sedan N20 Engine(F30), Sedan N26 Engine(F30), Wagon(F31)
View related parts
BMW 328i Stop Light Switch
Part Number: 61319240076
$45.66 MSRP: $56.80
You Save: $11.14 (20%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Replaced by: 35006876896
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 2012-2016 BMW 328i | N20 Engine(F30), N26 Engine(F30), Sedan N20 Engine(F30), Sedan N26 Engine(F30), Wagon(F31)
View related parts
BMW 328i Stop Light Switch
Part Number: 61318360417
$67.72 MSRP: $79.43
You Save: $11.71 (15%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Stoplamp Switch
- Replaces: 61-31-1-382-385
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 1996-1999 BMW 328i | Convertible(E36), Sedan(E36)
View related parts
BMW 328i Stop Light Switch
Part Number: 61318360420
$67.72 MSRP: $79.43
You Save: $11.71 (15%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Stoplamp Switch
- Replaces: 61-31-1-378-207, 61-31-1-378-208
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 1996-1999 BMW 328i | Convertible(E36), Sedan(E36)

BMW 328i Brake Light Switch

Brake Light Switch is an important of the car that enables the brake light to come on once the brake pedal has been depressed in a BMW 328i. It notifies other drivers on the road about the status of the BMW 328i whether it's slowing down or stopping and this augurs well on the safety of the roads. The BMW 328i Brake Light Switch is widely known for its efficiency and competency with 328i types and generations such as the E36, E46, E90, and F30. From the above analysis it may therefore be agreed that the Brake Light Switch is equally essential for the optimized performance of the BMW 328 since it plays the role of informing other users on road of the presence of the car. This component is expected to deal with the onset of daily driving, establishing sheer strength which is BMW's hallmark. Brake Light Switch some of the automotive market execute rapid response and high endurance of the switch. In addition to edging up safe, the Brake Light Switch improves the driving experience since failure in brake lights significantly affects the performance of a car. Thus, BMW 328i Brake Light Switch can be considered to be one of the fine examples of this brand's adherence to high-quality, dependability, and safety considerations while driving BMW 328i, which is why it is necessary for every owner of this car model.

If you are looking for OEM BMW 328i Brake Light Switch, we highly recommend to shop with us. Not only do we offer budget friendly prices, but we also provide fast delivery. In addition, we have a hassle-free return policy on all genuine BMW 328i Brake Light Switch that come backed by the manufacturer's warranty.

BMW 328i Brake Light Switch Parts Questions & Experts Answers

Stop Light Switch
61316967601
Q: Where is the brake light switch located and how do you remove and install it on BMW 328i?
A:
The brake light switch is located on the pedal bracket behind the instrument panel. To remove it, loosen and remove the retaining bolts securing the driver's side knee bolster panel, unclip the panel, and disconnect any electrical connectors. Reach up behind the instrument panel and disconnect the wiring connector from the switch. Pull the switch from the mounting, and if necessary, depress the clips and withdraw the switch mounting from the pedal bracket. To install the switch, fully depress the brake pedal and hold it down, then install the mount and maneuver the switch into position. Push the switch fully into position and slowly release the brake pedal to allow for automatic adjustment. Reconnect the electrical connector and check the operation of the brake lights. Finally, install the driver's side knee bolster panel.