×
- Hello
- Login or Register
- Quick Links
- Live Chat
- Track Order
- Parts Availability
- RMA
- Help Center
- Contact Us
- Shop for
- BMW Parts
- BMW Accessories
My Garage
My Account
Cart
Genuine BMW 330i Washer Reservoir
Windshield Washer Reservoir- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orSeries
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
7 Washer Reservoirs found
BMW 330i WINDSHIELD CLEANING CONTAINE
Part Number: 61669478352$99.47 MSRP: $125.80You Save: $26.33 (21%)Ships in 1-3 Business Days
BMW 330i Washer Fluid Reservoir
Part Number: 61667238669$85.69 MSRP: $108.38You Save: $22.69 (21%)Ships in 1-3 Business Days
BMW 330i Windshield Cleaning Container Tank
Part Number: 61667007970$106.42 MSRP: $132.58You Save: $26.16 (20%)Ships in 1-3 Business Days
BMW 330i Windshield / Headlamp Washer Fluid Reservoir
Part Number: 61677008057$106.42 MSRP: $132.58You Save: $26.16 (20%)Ships in 1-3 Business Days
BMW 330i Washer Fluid Reservoir
Part Number: 61667241680$94.73 MSRP: $119.80You Save: $25.07 (21%)Ships in 1-3 Business DaysBMW 330i Washer Fluid Reservoir
Part Number: 61667241672$90.21 MSRP: $114.09You Save: $23.88 (21%)Ships in 1-3 Business DaysBMW 330i Washer Fluid Reservoir
Part Number: 61677238668$89.99 MSRP: $113.82You Save: $23.83 (21%)Ships in 1-3 Business Days
BMW 330i Washer Reservoir
The BMW 330i Washer Reservoir contains the fluid that allows the windshield washers to blast away the grime and rainfall so that drivers can maintain clear vision without having to stop driving. It utilizes a durable plastic tank that sits inside the engine bay, a small electric pump, thin hoses, and tiny spray nozzles. Together, they use the fluid from the Washer Reservoir, force it under pressure, and spray it evenly over the glass for the wiper blades to sweep it all off. Over the course of the 330i generations, the basic design has remained the same, though mounting points were changed as BMW updated engine layouts, putting the Washer Reservoir near the headlights on some models and deeper behind the block on others. The working principle never changed. Once cracks occurred due to lack of fluid and overheating of the plastic, the leaks starve the pump of supply and the washers spit up air instead of water. A driver may observe splashing under the hood or a dry windshield when instigating the stalk, both of which hint that the Washer Reservoir needs replacement. Keeping the clear-sight reputation of the BMW badge is based on fluid level watching, pump activity listening, and prompt Washer Reservoir swapping in the event of damage, ensuring every 330i is prepared for sudden spray.
If you are looking for OEM BMW 330i Washer Reservoir, we highly recommend to shop with us. Not only do we offer budget friendly prices, but we also provide fast delivery. In addition, we have a hassle-free return policy on all genuine BMW 330i Washer Reservoir that come backed by the manufacturer's warranty.
BMW 330i Washer Reservoir Parts Questions & Experts Answers
- Q:How to remove and install Washer Pump and Washer Reservoir on BMW 330i?Posted by Bashir M.A:The reservoir of the washer is located behind the right front wheel well. To remove it, remove the inner fender liner. Then unclip the wiring harness and hose from the reservoir clips, disconnecting the filler hose as well. Maneuver away from fenderwell by removing bolt and disconnect electrical connectors and hoses from reservoir components. Reinstall in reverse order of removal ensuring that locating lugs on rear edge of reservoir engage properly with corresponding slots in inner fender. Fill the reservoir and inspect for leakage. They can be removed following the same guidelines used earlier to remove a windshield washer pump assembly, but only if you are mechanically inclined to do so can you proceed as they are disassembled in such a way that they cannot be reassembled correctly. Disconnect electric wiring connector(s) or hose(s) connected on washer pump(s), then rotate carefully clockwise after which raise them up out of container (reservoir). After proper inspection, replace damaged or worn-out pump sealing grommet(s). Install As mentioned above except use new sealant grommet when required.One may also follow the steps given above to withdraw washer bottle level switch. Rotate level switch counterclockwise; pull off from container (reservoir). Install As per removal procedure while using another sealant grommet when necessary.Refill and check for leaks.The windscreen cleaner nozzle can be taken out by removing cabin air filter cover followed by removing hoses and electrical connections.Press back on spray nozzle until it pops up at front edge then lift forward to release it from panel.Re-assemble the item opposite to what was done during detachment.The headlamp cleaning system nozzle will require prying out of this area below headlamp whereafter one can now remove cover from nozzle after separating it.Remove front bumper then detach heating element electrical connector.Apart from detaching mounting clip first then remove thread pipe section.Install similar manner like in removal process.The rear window washer nozzle can be taken out by removing high-mount brake light, releasing the clip, disconnecting the hose, and pulling it from high mount brake light.The reverse of the removal process will include aiming the nozzle at specified location on window.Run by central control module assembly located within main fusebox.Answered by BMW Parts Specialist Armando / Jan 13, 2022
Related BMW 330i Parts
BMW 330i Windshield Wiper
BMW 330i Wiper Blade
BMW 330i Wiper Arm
BMW 330i Washer Pump
BMW 330i Wiper Pivot
BMW 330i Wiper Motor
Browse by Year
2025 Washer Reservoir 2024 Washer Reservoir 2023 Washer Reservoir 2022 Washer Reservoir 2021 Washer Reservoir 2020 Washer Reservoir 2019 Washer Reservoir 2018 Washer Reservoir 2017 Washer Reservoir 2006 Washer Reservoir 2005 Washer Reservoir 2004 Washer Reservoir 2003 Washer Reservoir 2002 Washer Reservoir 2001 Washer Reservoir