How to remove and reinstall the Cruise Control Switch and other multifunction steering wheel switches and shift paddles on BMW 428i?

The negative (-) battery cable must be disconnected, and the battery terminal must be covered to prevent contact. Follow battery disconnection cautions. Take out the airbag from the steering wheel. To disassemble the steering wheel to access the Cruise Control Switch, remove the fasteners on the back of the left and right spokes. Secondly, disconnect the plug connection and pull the wiring from the foam channel inside the wheel. The Cruise Control Switch is clipped into the foam, so remove the Cruise Control Switch and the cover by pulling in the directions indicated. Finally, separate the Cruise Control Switch from the cover, and check the clips for damage. When re-installing, route the wires correctly and ensure that the Cruise Control Switch stays connected to the common wiring harness. To install an M Sports steering wheel, the fasteners on the wheel and rear have to be released. Then re-install in reverse. Remove the fasteners of the shift paddles, unclip the wiring harness and disconnect the connector, lift off the paddles, remove the fasteners of the paddles, and detach the Cruise Control Switch from the face of the steering wheel.

Genuine BMW 428i Cruise Control Switch

Steering Wheel Cruise Control Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Series

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Cruise Control Switches found

View related parts
BMW 428i Sport Multifunct Steering Wheel Switch
Part Number: 61319261861
$269.97 MSRP: $350.21
You Save: $80.24 (23%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch, Multifunct.Steering Wheel, Sport; Switch, Switch Assembly
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 2014-2016 BMW 428i | Convertible N20 Engine(F33), Convertible N26 Engine(F33), Convertible(F33), Coupe N20 Engine(F32), Coupe N26 Engine(F32)
View related parts
BMW 428i M-Sport Multifct Steering Wheel Switch
Part Number: 61317849406
$269.97 MSRP: $350.21
You Save: $80.24 (23%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch, Multifct.Steering Wheel, M-Sport; Multiplex Switch, Switch, Switch Assembly
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 2014-2016 BMW 428i | Convertible N20 Engine(F33), Convertible N26 Engine(F33), Convertible(F33), Coupe N20 Engine(F32), Coupe N26 Engine(F32)
View related parts
BMW 428i M-Sport Multifct Steering Wheel Switch
Part Number: 61317849407
$269.97 MSRP: $350.21
You Save: $80.24 (23%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch, Multifct.Steering Wheel, M-Sport; Multiplex Switch, Switch, Switch Assembly
- Replaces: 61-31-7-847-622
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 2014-2016 BMW 428i | Convertible N20 Engine(F33), Convertible N26 Engine(F33), Convertible(F33), Coupe N20 Engine(F32), Coupe N26 Engine(F32)
View related parts
BMW 428i Sport Multifunct Steering Wheel Switch
Part Number: 61319261862
$269.97 MSRP: $350.21
You Save: $80.24 (23%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch, Multifunct.Steering Wheel, Sport; Switch, Switch Assembly
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 2014-2016 BMW 428i | Convertible N20 Engine(F33), Convertible N26 Engine(F33), Convertible(F33), Coupe N20 Engine(F32), Coupe N26 Engine(F32)

BMW 428i Cruise Control Switch

As an essential part of the BMW 428i Cruise Control Switch users achieve constant speed keeping while avoiding continuous usage of the accelerator pedal. The Cruise Control Switch delivers reliable performance to various 428i models throughout the entire 4 Series model series. Users can manage the cruise control system through this switch for better efficiency and safety on extended drives by activating and setting and adjusting and deactivating the system. The BMW 428i Cruise Control Switch distinguishes itself in the market through its intuitive design which enables speed control and acceleration-deceleration features and automatic speed resumption. The cruise control system works effectively because this switch enables its proper operation which is vital for a fluid driving experience. Among other features the BMW 428i possesses from its 4 Series generation stands as a model having superlative performance together with premium luxury attributes made more reliable by its Cruise Control Switch. The Cruise Control Switch plays a crucial role because this model delivers superior EPA ratings as it successfully combines power with efficiency. The BMW 428i Cruise Control Switch enhances driving comfort alongside the company's dedication to automotive innovation and quality throughout the industry.

If you are looking for OEM BMW 428i Cruise Control Switch, we highly recommend to shop with us. Not only do we offer budget friendly prices, but we also provide fast delivery. In addition, we have a hassle-free return policy on all genuine BMW 428i Cruise Control Switch that come backed by the manufacturer's warranty.

BMW 428i Cruise Control Switch Parts Questions & Experts Answers

M-Sport Multifct Steering Wheel Switch
61317849406
Q: How to remove and reinstall the Cruise Control Switch and other multifunction steering wheel switches and shift paddles on BMW 428i?
A:
The negative (-) battery cable must be disconnected, and the battery terminal must be covered to prevent contact. Follow battery disconnection cautions. Take out the airbag from the steering wheel. To disassemble the steering wheel to access the Cruise Control Switch, remove the fasteners on the back of the left and right spokes. Secondly, disconnect the plug connection and pull the wiring from the foam channel inside the wheel. The Cruise Control Switch is clipped into the foam, so remove the Cruise Control Switch and the cover by pulling in the directions indicated. Finally, separate the Cruise Control Switch from the cover, and check the clips for damage. When re-installing, route the wires correctly and ensure that the Cruise Control Switch stays connected to the common wiring harness. To install an M Sports steering wheel, the fasteners on the wheel and rear have to be released. Then re-install in reverse. Remove the fasteners of the shift paddles, unclip the wiring harness and disconnect the connector, lift off the paddles, remove the fasteners of the paddles, and detach the Cruise Control Switch from the face of the steering wheel.