Genuine BMW 525i Fuel Injector O-Ring

Gas Injector Seal

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Series

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Fuel Injector O-Rings found

View related parts
BMW 525i O-Ring
Part Number: 13641437487
$6.75 MSRP: $8.50
You Save: $1.75 (21%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Injector O-Ring
- Replaces: 13-64-0-148-175
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 2001-2007 BMW 525i | Sedan(E39), Sedan(E60), Wagon(E39)
View related parts
BMW 525i O-Ring
Part Number: 13641730767
$7.24 MSRP: $8.34
You Save: $1.10 (14%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Replaces: 13-64-1-286-708
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 1989-1995 BMW 525i | M20 Engine(E34), M50 Engine(E34), Sedan(E34), Wagon(E34)
View related parts
BMW 525i O-Ring
Part Number: 13641437486
$8.28 MSRP: $9.54
You Save: $1.26 (14%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 2001-2005 BMW 525i | Sedan(E39), Sedan(E60), Wagon(E39)
View related parts
BMW 525i O-Ring
Part Number: 13531720252
$6.86 MSRP: $7.90
You Save: $1.04 (14%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 2001-2003 BMW 525i | Sedan(E39), Wagon(E39)
- 1991-1995 BMW 525i | M50 Engine(E34), Sedan(E34), Wagon(E34)
View related parts
BMW 525i O-Ring
Part Number: 13531720251
$8.75 MSRP: $10.09
You Save: $1.34 (14%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Replaces: 13-53-0-148-176
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 2001-2003 BMW 525i | Sedan(E39), Wagon(E39)
- 1991-1995 BMW 525i | M50 Engine(E34), Sedan(E34), Wagon(E34)
View related parts
BMW 525i O-Ring
Part Number: 13647531313
$5.06 MSRP: $6.38
You Save: $1.32 (21%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Injector O-Ring
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 2006-2007 BMW 525i | Sedan(E60)

BMW 525i Fuel Injector O-Ring

The BMW 525i Fuel Injector O-Ring provides an optimal seal to ensure that every drop of pressurized fuel stays where it is supposed to and enhances throttle response. As a result, it will prevent dangerous vapors from entering the cabin area of your vehicle. This Fuel Injector O-Ring fits between every 525i injector body and the rail on top and then between the nozzle and the intake runner below on all generations of 525i sedans and wagons. Essentially, it provides a dual seal that prevents fuel leaks and unwanted air entry. The Fuel Injector O-Ring, made of high-quality rubber, is designed to resist heat and ethanol additives. It remains elastic for thousands of heat cycles, allowing the electronic multiport system to spray a perfect mist during idle, highway cruising, and full acceleration. Dimensions are an exact match for every factory rail and manifold on E34, E39, E60, and F10 variants, so drivers can install with confidence that fit and sealing pressure are the same as original specs and recalibration is not required. When an aging seal becomes hard and rough to operate, this may result in a rich smell and flashing warning lamps on the dashboard. But swapping in a new Fuel Injector O-Ring will immediately restore optimum line pressure, improve fuel economy, and help catalytic converters stay within the safe operating temperature limits. The part also reduces fire risk by preventing drips near hot engine parts, endearing it further to BMW owners who value reliability. Every BMW driver knows that the Fuel Injector O-Ring is essential for ensuring smooth combustion with low emissions. Regardless of whether the vehicle is a classic nineties 525i or a later 525i built after 2010, the same BMW engineered geometry allows the Fuel Injector O-Ring to drop into place with no special tools needed. Regularly checking the Fuel Injector O-Ring at filter changes helps prevent leaks in any 525i. That care aligns with the BMW philosophy of performance.

If you are looking for OEM BMW 525i Fuel Injector O-Ring, we highly recommend to shop with us. Not only do we offer budget friendly prices, but we also provide fast delivery. In addition, we have a hassle-free return policy on all genuine BMW 525i Fuel Injector O-Ring that come backed by the manufacturer's warranty.