Another area is the front Fender Splash Shield; to have access, you need to lift the front side of the car and remove the wheel. In case of the front and rear fender liners, one has to follow the same procedure in order to remove and install them. It is recommended to begin by unbearing the rivets from the fender edge by punching the center pin with the help of a punch, then pry the rivets out with the help of a plastic prying tool. One should also note that rivets are of one-time use; therefore, one should always ensure that there is a stash of replacement rivets. Unspout the ambient temperature sensor from the bottom of the Fender Splash Shield for the driver's side. Thirdly, unscrew the Fender Splash Shield and then pull out from behind the fender trim piece, and that will complete the process.