Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Contact Us Help Center
Make sure this part fits

BMW 13627525014 Camshaft Position Sensor

2006-2021 BMW 13-62-7-525-014

Customer Questions & Expert Answers (9)
13627525014 BMW Camshaft Position Sensor Product Photo 1 of 1
13627525014 BMW Camshaft Position Sensor Product Photo 1 of 1
13627525014 BMW Camshaft Position Sensor Illustration 1 of 1
  • Part Description
    Camshaft Sensor
  • Replaces
    13-62-7-546-660, 13-62-7-558-518
  • Manufacturer
    BMW
Make sure this part fits
$115.92 MSRP: $166.83
You Save: $50.91 (31%)
Ships in 1-3 Business Days
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers

  • 13627525014 Camshaft Position Sensor is Ref No. 03 in the diagram below

    2008 BMW Z4 Camshaft Position Sensor Diagram for 13627525014
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts

  • Product Specifications

    BrandGenuine BMW
    Manufacturer Part Number13627525014
    Part DescriptionCamshaft Sensor
    Other NamesM.A.P. Sensor, Pulsator
    Item Weight0.60 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    Replaces13-62-7-546-660, 13-62-7-558-518
    ManufacturerBMW
    SKU13627525014
    WarrantyThis genuine BMW part is guaranteed by BMW's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65

  • Vehicle Fitment

    Year Make Model Submodel
    2011 BMW 1 Series MCoupe(E82)
    2008-2013 BMW 128iConvertible N51 Engine(E88), Convertible N52 Engine(E88), Coupe N51 Engine(E82), Coupe N52 Engine(E82)
    2008-2013 BMW 135iConvertible N54 Engine(E88), Convertible N55 Engine(E88), Convertible(E88), Coupe N54 Engine(E82), Coupe N55 Engine(E82), Coupe(E82)
    2014-2016 BMW 228iConvertible N20 Engine(F23), Convertible N26 Engine(F23), Coupe N20 Engine(F22), Coupe N26 Engine(F22), N20 Engine(F22), N26 Engine(F22)
    2015-2016 BMW 228i xDriveConvertible N20 Engine(F23), Convertible N26 Engine(F23), Coupe N20 Engine(F22), Coupe N26 Engine(F22)
    2013-2018 BMW 320iSedan(F30)
    2013-2018 BMW 320i xDriveSedan(F30)
    2006-2011 BMW 323iSedan(E90)
    2006 BMW 325iSedan(E90)
    2006 BMW 325xiSedan(E90), Wagon(E91)
    View More

  • Customer Questions & Expert Answers

    Q:
    Does PN fit the VIN? Posted by BMWPartsDeal Specialist
    A:
    You can Select Your Vehicle to check if 13627525014 fits your vehicle.
    Posted by BMWPartsDeal Specialist
    Q:
    How to remove and install the Camshaft Position Sensor on the BMW 325i? Posted by Customer
    A:
    Unfasten the air intake duct mounting bolts and detach the duct. The air hose should be disconnected as the duct is being removed. In front of their respective camshaft ends, you will find that a CMP sensor is placed on each side of the cylinder head. Ensure that ignition has been turned off. Press together locking lugs and pull off sensor wiring plug. At this point, depress clip and separate connector for electrical power to CMP sensor. To remove Sensor loosen bolt retaining it in place. Find seal and recover it by removing screwdriver from its location at the end of fixing bolt connections where it attaches itself onto sealing surface (when required). Replace seal if necessary or damaged. It's just like putting back old things in place after getting out new ones for an exchange before putting them back again.
    Posted by BMWPartsDeal Specialist
    Q:
    How to remove and install the Camshaft Position Sensor on the BMW 328i? Posted by Customer
    A:
    Unfasten the air intake duct mounting bolts and detach the duct. The air hose should be disconnected as the duct is being removed. In front of their respective camshaft ends, you will find that a CMP sensor is placed on each side of the cylinder head. Ensure that ignition has been turned off. Press together locking lugs and pull off sensor wiring plug. At this point, depress clip and separate connector for electrical power to CMP sensor. To remove Sensor loosen bolt retaining it in place. Find seal and recover it by removing screwdriver from its location at the end of fixing bolt connections where it attaches itself onto sealing surface (when required). Replace seal if necessary or damaged. It's just like putting back old things in place after getting out new ones for an exchange before putting them back again.
    Posted by BMWPartsDeal Specialist
    Q:
    How to remove and install the intake camshaft position sensor on BMW 335i? Posted by Customer
    A:
    Remove the engine covers, air filter housing, and ducts. Detach the camshaft position sensor connector, remove the mounting bolt, and take out the sensor from the cylinder head. Catch any oil drips. Installation is the reverse of removal. Replace the mounting bolt, use new sealing O-rings, ensure the sensor harness is routed correctly, and clear any ECM fault codes.
    Posted by BMWPartsDeal Specialist
    Q:
    How to remove and install the Camshaft Position Sensor on the BMW 330i? Posted by Customer
    A:
    Unfasten the air intake duct mounting bolts and detach the duct. The air hose should be disconnected as the duct is being removed. In front of their respective camshaft ends, you will find that a CMP sensor is placed on each side of the cylinder head. Ensure that ignition has been turned off. Press together locking lugs and pull off sensor wiring plug. At this point, depress clip and separate connector for electrical power to CMP sensor. To remove Sensor loosen bolt retaining it in place. Find seal and recover it by removing screwdriver from its location at the end of fixing bolt connections where it attaches itself onto sealing surface (when required). Replace seal if necessary or damaged. It's just like putting back old things in place after getting out new ones for an exchange before putting them back again.
    Posted by BMWPartsDeal Specialist
    Q:
    How to remove and install the exhaust camshaft position sensor on BMW 335i? Posted by Customer
    A:
    Turn off the ignition before starting. Remove the engine covers, air filter housing, and ducts. Detach the camshaft position sensor connector, remove the mounting bolt, and take out the sensor from the cylinder head. Trap any oil drips. The installation method is the reverse of removal.
    Posted by BMWPartsDeal Specialist
    Q:
    Where are the intake and exhaust camshaft position sensors located and how to replace them on a BMW X3? Posted by Customer
    A:
    The intake Camshaft Position Sensor on the M54 engine is located at the left side of the cylinder head close to its front. First, ensure that the ignition is turned off as a safety precaution. Remove upper engine covers and also air-filter housing with ducts. At the left side of the cylinder head, disconnect Engine Vent Hose from Cylinder Head Cover and VANOS solenoid electrical connector. Unscrew VANOS solenoid and in case of need, disconnect oil supply line from VANOS adjustment unit. Take away Camshaft Position Sensor mounting bolt followed by taking out the sensor from cylinder head. We shall reach under the Intake Manifold to remove Camshaft Position Sensor Harness Bracket Assembly so we can unplug its harness before we can take it out completely. Before removal, attach a stiff wire to the connector that will enable you to route harness during reinstallation easily. While installing new sensor use new sealing O-rings only; make sure that sensor harness is routed same way as before. Verify and clear any fault codes stored in ECM memory. Check ECU for error codes responsible for setting off MIL light. Replacing exhaust Camshaft Position Sensor on M54 engine is similar but it locates on right side of cylinder head closest to front. Besides for N52 engines, intake one mounts at left front face of cylinder head while exhaust one mounts at right front face of cylinder head. Similarly, if not identical steps are followed when replacing these sensors as for M54 engine whereby ignition should be ensured that it is off first together with removing upper engine covers, air filter housing plus ducting, detaching Camshaft Position Sensor electrical connector, removing mounting bolt and installing new one using new sealed O-rings. Verify and clear any fault codes stored in ECM memory. Walk around car ensuring every door is shut tightly or not.
    Posted by BMWPartsDeal Specialist
    Q:
    Where is the exhaust camshaft position sensor located for the 2007 BMW 335i? Posted by Customer
    A:
    The exhaust camshaft position sensor is located at the right front of the cylinder head.
    Posted by BMWPartsDeal Specialist
    See expert answers on similar Camshaft Position Sensor
    Q:
    What position is this part located on the engine? Posted by Customer
    A:
    By removing the electric fan, the front of the engine can be easily accessed and detached from the engine block towards the middle and top.
    Posted by BMWPartsDeal Specialist 8/2/2023
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine BMW Part 13627525014, the Right Choice

To guarantee reliability, choose BMW part # 13627525014 Camshaft Position Sensor. It is also referred to as Camshaft Position Sensor. This genuine part is built directly by BMW under very rigorous testing and developed using reliable materials to tolerate years of heavy use and present long-lasting performance. This part fits 2007-2016 328i, 2015-2018 M3, 2007-2017 X3, 2007-2018 X5.

BMWPartsDeal.com is a leading supplier of genuine BMW parts and accessories such as 13-62-7-525-014 Camshaft Position Sensor. Looking to get brand-new OEM BMW parts? Our prices are highly competitive, and we supply a wide range of quality genuine parts. Moreover, all the parts are accompanied by a manufacturer's warranty and a no-hassle return policy to support your convenience.

Why choose BMW Parts Deal

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly