How to remove and install a A/C Accumulator,A/C Compressor,A/C Condenser,A/C Evaporator Core and A/C Expansion Valve on BMW 325i?

For A/C system maintenance on a BMW,Discharge and recover refrigerant at a certified shop. Heater Assembly: Remove, access A/C evaporator core by detaching necessary parts, and reinstall. Remember to replace the A/C accumulator. Cowl Trim Panel: Remove and replace caps as required. Ensure replacement of damaged seals to prevent leaks. Cabin Air Filter: Remove, access, and manage components behind the engine, including the expansion valve. Replace used seals. A/C Accumulator: Replace under certain conditions like system contamination, replacements of major components, or extended exposure. Condenser: Detach, replace desiccant sack in the new insert, and reinstall. Compressor (3.0L & 2.0L): Remove by detaching necessary components, including thermostat (for 3.0L). Note: Refill with proper refrigerant oil during reinstallation. Sensors: Gently remove from their locations, either from the instrument panel, engine compartment, or heater housing. Replace as per original setup. Pressure Sensor: Located on the left refrigerant line, remove after refrigerant discharge, and reinstall. Ensure tight connection. Condenser: Situated before the radiator, remove by detaching related components, and reattach. A/C Evaporator Core: Access by removing the passenger-side intake duct and associated parts. Reinstall securely. Always use professional services for A/C tasks due to their technical nature.

Genuine BMW 325i A/C Evaporator Core

A/C Evaporators

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Series

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 A/C Evaporator Cores found

View related parts
BMW 325i Evaporator
Part Number: 64119290888
$516.84 MSRP: $719.87
You Save: $203.03 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Evaporator Core
- Replaces: 64-11-9-256-346, 64-11-6-934-781
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 2006 BMW 325i | Sedan(E90)
View related parts
BMW 325i Evaporator
Part Number: 64119135744
$513.20 MSRP: $714.81
You Save: $201.61 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Evaporator Core
- Replaces: 64-11-8-384-251
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 2001-2005 BMW 325i | Sedan M54 Engine(E46), Sedan M56 Engine(E46), Sedan(E46), Wagon M54 Engine(E46), Wagon M56 Engine(E46), Wagon(E46)
View related parts
BMW 325i Evaporator
Part Number: 64119179802
$516.84 MSRP: $719.87
You Save: $203.03 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Evaporator Core
- Replaces: 64-11-6-934-782, 64-11-9-130-345
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 2006 BMW 325i | Sedan(E90)
View related parts
BMW 325i Evaporator
Part Number: 64116934781
$516.84 MSRP: $719.87
You Save: $203.03 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Replaced by: 64119290888
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 2006 BMW 325i | Sedan(E90)
View related parts
BMW 325i Evaporator
Part Number: 64119256346
$516.84 MSRP: $719.87
You Save: $203.03 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Replaced by: 64119290888
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 2006 BMW 325i | Sedan(E90)
View related parts
BMW 325i Evaporator
Part Number: 64518391780
$559.00 MSRP: $778.60
You Save: $219.60 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 1987-1992 BMW 325i | Convertible(E30), Coupe(E30), Sedan(E30)

BMW 325i A/C Evaporator Core

The A/C Evaporator Core of the BMW 325i is a component located within the cooling circuit that removes heat and moisture from cabin air. In a car's air conditioning system, the A/C Evaporator Core is a compact aluminum radiator mounted under the dash next to the heater core. Inside are narrow tubes that send refrigerant that is cold as it passes through. The blower pushes warm air against the fins of the core. Heat passes from the air into the refrigerant, and cool dry air flows back into the car. The unit also dehumidifies the cockpit by condensing moisture during this exchange and passes the collected water out a drain tube. Aluminum construction was chosen for the A/C Evaporator Core in the 325i models because of its lightweight and heat absorption characteristics. The earlier and later 325i, along with a few other models, have the same fin-and-tube layout with improvements to alloys and tighter seals that prevent leaks affecting some earlier BMW fin-and-tube parts. An intact A/C Evaporator Core is necessary for all years. A pinhole leak permits the escape of refrigerant that stops cooling. If corrosion, debris accumulation, or a clogged drain tube compromise the part, a new A/C Evaporator Core will restore full functionality of the system. This keeps the BMW 325i climate system dependably cold, as continues to be the case for every BMW.

If you are looking for OEM BMW 325i A/C Evaporator Core, we highly recommend to shop with us. Not only do we offer budget friendly prices, but we also provide fast delivery. In addition, we have a hassle-free return policy on all genuine BMW 325i A/C Evaporator Core that come backed by the manufacturer's warranty.

BMW 325i A/C Evaporator Core Parts Questions & Experts Answers

Evaporator
64119290888
Q:
How to remove and install a A/C Accumulator,A/C Compressor,A/C Condenser,A/C Evaporator Core and A/C Expansion Valve on BMW 325i?
Posted by Gustavo P.
A:
For A/C system maintenance on a BMW,Discharge and recover refrigerant at a certified shop. Heater Assembly: Remove, access A/C evaporator core by detaching necessary parts, and reinstall. Remember to replace the A/C accumulator. Cowl Trim Panel: Remove and replace caps as required. Ensure replacement of damaged seals to prevent leaks. Cabin Air Filter: Remove, access, and manage components behind the engine, including the expansion valve. Replace used seals. A/C Accumulator: Replace under certain conditions like system contamination, replacements of major components, or extended exposure. Condenser: Detach, replace desiccant sack in the new insert, and reinstall. Compressor (3.0L & 2.0L): Remove by detaching necessary components, including thermostat (for 3.0L). Note: Refill with proper refrigerant oil during reinstallation. Sensors: Gently remove from their locations, either from the instrument panel, engine compartment, or heater housing. Replace as per original setup. Pressure Sensor: Located on the left refrigerant line, remove after refrigerant discharge, and reinstall. Ensure tight connection. Condenser: Situated before the radiator, remove by detaching related components, and reattach. A/C Evaporator Core: Access by removing the passenger-side intake duct and associated parts. Reinstall securely. Always use professional services for A/C tasks due to their technical nature.
Answered by BMW Parts Specialist Blaine / Feb 04, 2025