How to remove and install Door Latch Assembly,Door Lock Cylinder and Door Handle on BMW 325i?

To remove the inside door handle, begin by pulling off the inside door trim panel, undoing the interior handle lever, let go of the cable and take off the handle. When removing a front door latch assembly, you will have to remove a window regulator assembly; unplug wiring harnesses, release cables and release rods then loosen and remove the latch. The removal of front door exterior handle involves taking out lock cylinder (if necessary), rear cover and finally disengaging it from attachment. To take away the front door lock cylinder entails accessing then removing a single retaining bolt before pulling it out. In backdoor, start by removing inner trim panel and watershield, unplugging latch wiring, opening rod and opening cable in that order before removing latch assembly. To get rid of rear outer handle on a backdoor remove rear cover as well as pull it outwards while ensuring that latch lever is kept properly positioned. On installation however; you reverse these steps making sure components are properly sealed and secured; check functioning of the latch prior to closing door.

Genuine BMW 325i Door Lock Cylinder

Door Lock Cylinder Tumbler

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Series

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

55 Door Lock Cylinders found

View related parts
BMW 325i Trunk Lid Latch Lock Actuator
Part Number: 51247201561
$102.87 MSRP: $120.94
You Save: $18.07 (15%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock, Trunk Lid; Lock, Lock Actuator
- Replaces: 51-24-7-057-364, 51-24-7-026-192, 51-24-8-229-176
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 2001-2005 BMW 325i | Wagon M54 Engine(E46), Wagon M56 Engine(E46), Wagon(E46)
View related parts
BMW 325i Catch Key Left
Part Number: 51217019975
$127.15 MSRP: $147.86
You Save: $20.71 (15%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Catch With Key Left; Lock Cylinder
- Position: Driver Side
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 2001-2005 BMW 325i | Sedan M54 Engine(E46), Sedan M56 Engine(E46), Sedan(E46), Wagon M54 Engine(E46), Wagon M56 Engine(E46), Wagon(E46)
View related parts
BMW 325i Catch Key Left
Part Number: 51218244051
$128.35 MSRP: $149.26
You Save: $20.91 (15%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Catch With Key Left; Lock Cylinder
- Position: Driver Side
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 2001-2005 BMW 325i | Sedan M54 Engine(E46), Sedan M56 Engine(E46), Sedan(E46), Wagon M54 Engine(E46), Wagon M56 Engine(E46), Wagon(E46)
View related parts
BMW 325i Lock Cylinder Repair Kit Left
Part Number: 51218135957
$76.43 MSRP: $92.28
You Save: $15.85 (18%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Repair Kit Lock Cylinder Left; Pivot Assembly
- Position: Driver Side
- Replaces: 51-21-8-135-955, 51-21-8-135-956
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 1992-1995 BMW 325i | Convertible(E36), Sedan(E36)
View related parts
BMW 325i Code Lock Left
Part Number: 51218244049
$155.26 MSRP: $180.55
You Save: $25.29 (15%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock With Code Left; Lock Cylinder
- Position: Driver Side
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 2001-2005 BMW 325i | Sedan M54 Engine(E46), Sedan M56 Engine(E46), Sedan(E46), Wagon M54 Engine(E46), Wagon M56 Engine(E46), Wagon(E46)
View related parts
BMW 325i Catch Key Left
Part Number: 51211911065
$80.07 MSRP: $92.59
You Save: $12.52 (14%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Catch With Key Left; Cylinder & Key, Lock Cylinder
- Position: Driver Side
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 1987-1992 BMW 325i | Convertible(E30), Coupe(E30), Sedan(E30)
View related parts
BMW 325i Lock Cylinder Repair Kit Left
Part Number: 51218203099
$82.54 MSRP: $99.66
You Save: $17.12 (18%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Repair Kit Lock Cylinder Left; Lock Cylinder, Lock Cylinder Assy
- Position: Driver Side
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 1992-1995 BMW 325i | Convertible(E36), Sedan(E36)
View related parts
BMW 325i Code Lock Left
Part Number: 51211911063
$110.49 MSRP: $126.34
You Save: $15.85 (13%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock With Code Left
- Position: Driver Side
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 1987-1992 BMW 325i | Convertible(E30), Coupe(E30), Sedan(E30)
View related parts
BMW 325i Trunk Lid Lock With Key
Part Number: 51241911948
$131.13 MSRP: $152.49
You Save: $21.36 (15%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock Cylinder
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 1987-1992 BMW 325i | Convertible(E30), Coupe(E30), Sedan(E30)
View related parts
BMW 325i Set Uniform Locking System With Ews Control Unit (Code)
Part Number: 51219068934
$658.25 MSRP: $835.94
You Save: $177.69 (22%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Set Unif.Lock.Syst.W/Ews Ctrl Unit(Code)
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 1992-1995 BMW 325i | Sedan(E36)
View related parts
BMW 325i Set Uniform Locking System With Ews Control Unit (Code)
Part Number: 51218070006
$684.59 MSRP: $869.38
You Save: $184.79 (22%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Set Unif.Lock.Syst.W/Ews Ctrl Unit(Code)
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 1992-1995 BMW 325i | Sedan(E36)
View related parts
BMW 325i Set Uniform Locking System With Ews Control Unit (Code)
Part Number: 51218070014
$705.41 MSRP: $895.82
You Save: $190.41 (22%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Set Unif.Lock.Syst.W/Ews Ctrl Unit(Code)
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 1993-1995 BMW 325i | Convertible(E36)
View related parts
BMW 325i Set Uniform Locking System With Ews Control Unit (Code)
Part Number: 51219068940
$705.41 MSRP: $895.82
You Save: $190.41 (22%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Set Unif.Lock.Syst.W/Ews Ctrl Unit(Code)
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 1993-1995 BMW 325i | Convertible(E36)
View related parts
BMW 325i Set Uniform Locking System With Ews Control Unit (Code)
Part Number: 51210031460
$654.43 MSRP: $883.03
You Save: $228.60 (26%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Set Unif.Lock.Syst.W/Ews Ctrl Unit(Code)
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 2001-2005 BMW 325i | Wagon M54 Engine(E46), Wagon M56 Engine(E46), Wagon(E46)
View related parts
BMW 325i Set Uniform Locking System With Ews Control Unit (Code)
Part Number: 51210017974
$705.64 MSRP: $896.12
You Save: $190.48 (22%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Set Unif.Lock.Syst.W/Ews Ctrl Unit(Code)
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 2001-2005 BMW 325i | Sedan M54 Engine(E46), Sedan M56 Engine(E46), Sedan(E46)
View related parts
BMW 325i Set Uniform Locking System With Ews Control Unit (Code)
Part Number: 51210031342
$705.64 MSRP: $896.12
You Save: $190.48 (22%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Set Unif.Lock.Syst.W/Ews Ctrl Unit(Code)
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 2001-2005 BMW 325i | Sedan M54 Engine(E46), Sedan M56 Engine(E46), Sedan(E46)
View related parts
BMW 325i Set Uniform Locking System With Ews Control Unit (Code)
Part Number: 51210032839
$706.43 MSRP: $924.30
You Save: $217.87 (24%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Set Unif.Lock.Syst.W/Ews Ctrl Unit(Code)
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 2006 BMW 325i | Sedan(E90)
View related parts
BMW 325i Set Uniform Locking System With Ews Control Unit (Code)
Part Number: 51210032840
$706.43 MSRP: $924.30
You Save: $217.87 (24%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Set Unif.Lock.Syst.W/Ews Ctrl Unit(Code)
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 2006 BMW 325i | Sedan(E90)
View related parts
BMW 325i Set Uniform Locking System With Cas Control Unit (Code)
Part Number: 51210034613
$706.43 MSRP: $924.30
You Save: $217.87 (24%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Set Uniform Lock.Syst. W/Cas Control(Code)
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 2006 BMW 325i | Sedan(E90)
View related parts
BMW 325i Code Lock Left
Part Number: 51211901537
$140.11 MSRP: $180.21
You Save: $40.10 (23%)
Product Specifications
- Other Name: Lock With Code Left
- Position: Driver Side
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 2001-2005 BMW 325i | Sedan M54 Engine(E46), Sedan(E46), Wagon M54 Engine(E46), Wagon(E46)
- 1992-1995 BMW 325i | Convertible(E36), Sedan(E36)

| Page 1 of 3 |Next >

1-20 of 55 Results

BMW 325i Door Lock Cylinder

It is a car spare part that is very crucial to BMW 325i vehicles when it comes to lock and security systems of the car. Able to give reliable and excellent performance, the Door Lock Cylinder facilitates the locking and opening of the doors using the key with a lot of ease to allow drivers an easy access to their vehicles. Nevertheless, new car manufacturing companies incorporate keyless entry systems commonly but the BMW 325i incorporates Door Lock Cylinder, thereby improving the efficiency and security of the car. This firmly confirms that the part is compatible with different models of 325i, and in this way, meets all requirements of these modifications, meeting the top quality level of BMW. The Door Lock Cylinder is agreed robust however it is a component which wear and tear must replace it instantly once it malfunctions and causes locking problems. This emphasizes the firm's focus towards quality and customer satisfaction as a way of strengthening their image. Main aspects of BMW 325i Door Lock Cylinder are the following: the construction is rather durable; it is made with the precise accuracy that can let the lock serve a rather long time. Including this component in the BMW 325i ensures that the brand has a distinguished car with great performance and safety, thus making the Door Lock Cylinder a market innovation. Thus, the BMW 325i Door Lock Cylinder is not just the simple part; it reflects the BMW company's commitment to quality.

If you are looking for OEM BMW 325i Door Lock Cylinder, we highly recommend to shop with us. Not only do we offer budget friendly prices, but we also provide fast delivery. In addition, we have a hassle-free return policy on all genuine BMW 325i Door Lock Cylinder that come backed by the manufacturer's warranty.

BMW 325i Door Lock Cylinder Parts Questions & Experts Answers

Code Lock Left
51217199833
Q: How to remove and install Door Latch Assembly,Door Lock Cylinder and Door Handle on BMW 325i?
A:
To remove the inside door handle, begin by pulling off the inside door trim panel, undoing the interior handle lever, let go of the cable and take off the handle. When removing a front door latch assembly, you will have to remove a Window Regulator assembly; unplug wiring harnesses, release cables and release rods then loosen and remove the latch. The removal of front door exterior handle involves taking out lock cylinder (if necessary), rear cover and finally disengaging it from attachment. To take away the front door lock cylinder entails accessing then removing a single retaining bolt before pulling it out. In backdoor, start by removing inner trim panel and watershield, unplugging latch wiring, opening rod and opening cable in that order before removing latch assembly. To get rid of rear outer handle on a backdoor remove rear cover as well as pull it outwards while ensuring that latch lever is kept properly positioned. On installation however; you reverse these steps making sure components are properly sealed and secured; check functioning of the latch prior to closing door.

Related BMW 325i Parts

Browse by Year

2006 Door Lock Cylinder 2005 Door Lock Cylinder 2004 Door Lock Cylinder 2003 Door Lock Cylinder 2002 Door Lock Cylinder 2001 Door Lock Cylinder 1995 Door Lock Cylinder 1994 Door Lock Cylinder 1993 Door Lock Cylinder 1992 Door Lock Cylinder 1991 Door Lock Cylinder 1990 Door Lock Cylinder 1989 Door Lock Cylinder 1988 Door Lock Cylinder 1987 Door Lock Cylinder