×
- Hello
- Login or Register
- Quick Links
- Live Chat
- Track Order
- Parts Availability
- RMA
- Help Center
- Contact Us
- Shop for
- BMW Parts
- BMW Accessories
My Garage
My Account
Cart
Genuine BMW 325i Flywheel
Clutch Flywheel- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orSeries
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
10 Flywheels found
BMW 325i Twin Mass Flywheel
Part Number: 21217512474$1111.65 MSRP: $1548.34You Save: $436.69 (29%)Ships in 1-3 Business Days
BMW 325i Twin Mass Flywheel
Part Number: 21207533868$961.71 MSRP: $1339.50You Save: $377.79 (29%)Ships in 1-3 Business Days
BMW 325i Twin Mass Flywheel
Part Number: 21207573785$1292.57 MSRP: $1800.34You Save: $507.77 (29%)Ships in 1-3 Business Days
BMW 325i Flywheel
Part Number: 11221716275$478.43 MSRP: $573.82You Save: $95.39 (17%)Ships in 1-3 Business Days
BMW 325i Twin Mass Flywheel
Part Number: 21211223593$980.83 MSRP: $1366.13You Save: $385.30 (29%)Ships in 1-3 Business Days
BMW 325i Flywheel
Part Number: 11221717383$592.36 MSRP: $710.47You Save: $118.11 (17%)Ships in 1-3 Business Days
BMW 325i Flywheel Automatic
Part Number: 11227548102$696.11 MSRP: $858.76You Save: $162.65 (19%)Ships in 1-3 Business Days
BMW 325i Flywheel
Both energy storage and management functions of the Flywheel in BMW 325i vehicles occur at the front position of the clutch disc attached to the engine crankshaft. The main goal of the Flywheel is to regulate fast speed changes which occur when the clutch is released and it additionally delivers engine power in a smoother manner. The toothed wheel rim on the Flywheel enables engine start-ups when the pinion of the starter engages with it. Different types of Flywheels have been employed in the 325i since its inception yet their main variations stem from materials and related fabrication patterns. The basic steel BMW Flywheel design differs from advanced versions constructed with composite carbon fibers which combine with magnetic bearings to let the system spin at higher speeds. Any type of BMW 325i Flywheel requires precise balance alongside absence of damage to function effectively as an energy storage unit and power regulator.
If you are looking for OEM BMW 325i Flywheel, we highly recommend to shop with us. Not only do we offer budget friendly prices, but we also provide fast delivery. In addition, we have a hassle-free return policy on all genuine BMW 325i Flywheel that come backed by the manufacturer's warranty.
BMW 325i Flywheel Parts Questions & Experts Answers
- Q: How to install a flywheel/driveplate in 2.0L four cylinder engine on BMW 325i?A:New flywheel/driveplate retaining bolts must be used on installation. On manual transmission models, remove the transmission and the clutch assembly. On automatic transmission models, remove the transmission and torque converter. Prevent the flywheel/driveplate from turning by locking the ring gear teeth with a similar arrangement or by bolting a strap between the flywheel/driveplate and the cylinder block/crankcase. Loosen and remove the retaining bolts and remove the flywheel/driveplate, noting its locating dowel. Be careful - the flywheel/driveplate is very heavy. Discard the bolts; they must be replaced with new ones whenever they are loosened or removed. If the flywheel-to-clutch mating surface is deeply scored, cracked or otherwise damaged, then the flywheel must be replaced or surface-ground. If the ring gear is badly worn or has missing teeth, then it must be replaced. Manual transmission models are equipped with a dual-mass flywheel. While the manufacturer does not publish any checking procedures, rotate the inner mass by hand counterclockwise, mark its position in relation to the outer mass, then rotate it by hand clockwise and measure the travel. As a general rule, if the movement is more than one inch or less than half-inch, consult a dealer or transmission specialist as to whether a new unit is needed. Clean the mating surfaces of the flywheel/driveplate and crankshaft and remove all traces of locking compound from the crankshaft threaded holes. Install the flywheel/driveplate to the crankshaft, engaging it with the crankshaft locating dowel, and install the new retaining bolts. If the new bolts are not supplied precoated with locking compound, apply a few drops prior to installing the bolts. Lock the flywheel/driveplate using the method employed on removal, then tighten all the retaining bolts to the specified torque setting in a diagonal sequence. Install the clutch assembly and manual transmission or the automatic transmission and torque converter.
