How to remove and install fuel injectors and Fuel Rail on BMW 328i?

To disconnect the negative battery cable, relieve fuel system pressure, and remove the engine cover, strut tower cross brace, and sound insulator. Remove ignition coils and high pressure fuel line. Disconnect the electrical connector to the high pressure sensor and loosen the high-pressure fuel pipe unions. Loosen fuel rail bolts and rotate the fuel rail to clear the injectors. Disconnect the electrical connectors from the injectors and remove the ground wire. Remove the hold-down elements and clean the area. Remove the injectors from the cylinder head and place plastic caps over each. Remove the coupling element from each injector and cut the Teflon ring. Clean the injector nozzle and install new Teflon rings if reusing the injectors. Program the adjustment values for new injectors. Install the injectors and tighten the coupling element bolts. Reconnect the high-pressure pipe unions. Tighten the injector clamp bolts and T-shaped coupling element mounting bolts. Reinstall the high-pressure fuel pump lines, ignition coils, and remaining components. For the 3.0L engine, remove the plastic cover, disconnect the fuel feed pipe, and remove the electrical connector strip. Remove the fuel rail and injectors as an assembly. Lubricate the fuel injector O-rings and install them to the fuel rail with the clips. Reverse the removal steps.

Genuine BMW 328i Fuel Rail

Engine Fuel Rail

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Series

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Fuel Rails found

View related parts
BMW 328i High-Pressure Rail
Part Number: 13537585411
$320.66 MSRP: $442.81
You Save: $122.15 (28%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fuel Rail
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 2012-2016 BMW 328i | N20 Engine(F30), N26 Engine(F30), Sedan N20 Engine(F30), Sedan N26 Engine(F30), Wagon(F31)
View related parts
BMW 328i Injection Tube
Part Number: 13537542541
$487.08 MSRP: $637.30
You Save: $150.22 (24%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fuel Rail
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 2007-2013 BMW 328i | Convertible N52 Engine(E93), Coupe N52 Engine(E92), Sedan N52 Engine(E90), Wagon(E91)
View related parts
BMW 328i Injection Tube
Part Number: 13531433024
$209.74 MSRP: $250.77
You Save: $41.03 (17%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fuel Rail
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 1999-2000 BMW 328i | Sedan(E46)
View related parts
BMW 328i Injection Tube
Part Number: 13531436470
$417.95 MSRP: $503.99
You Save: $86.04 (18%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fuel Rail
- Replaces: 13-53-1-427-531
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 1996-1999 BMW 328i | Convertible(E36), Sedan(E36)
View related parts
BMW 328i Injection Tube
Part Number: 13537556954
$296.94 MSRP: $385.20
You Save: $88.26 (23%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fuel Rail
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 2007-2013 BMW 328i | Convertible N51 Engine(E93), Coupe N51 Engine(E92), Sedan N51 Engine(E90)

BMW 328i Fuel Rail

The BMW 328i Fuel Rail functions to transmit pressurized fuel deposits from the fuel pump to the injectors to spray fuel properly into the combustion chamber therefore achieving efficiency and emission control goals. The fuel distribution system among BMW 328i vehicles depends on electronic multiport fuel injection which attaches Fuel Rail components to port Fuel Rail found inside the intake manifold or cylinder head. Through this configuration the powertrain control module (PCM) determines when to adjust fuel injection timing using inputs from multiple sensors to supply suitable fuel amounts dependent on engine load. Multiple fuel injection systems have evolved for the BMW 328i as the vehicle progressed through time featuring throttle body injection (TBI) followed by gasoline direct injection (GDI). GDI constitutes the current progress in automotive Fuel Rail systems because it injects pressurized fuel straight into the combustion chamber to improve engine efficiency. GDI systems provide enhanced performance and decreased fuel consumption through their different fuel delivery mechanisms and elevated pressure operations when compared to previous technologies.

If you are looking for OEM BMW 328i Fuel Rail, we highly recommend to shop with us. Not only do we offer budget friendly prices, but we also provide fast delivery. In addition, we have a hassle-free return policy on all genuine BMW 328i Fuel Rail that come backed by the manufacturer's warranty.

BMW 328i Fuel Rail Parts Questions & Experts Answers

Injection Tube
13537542541
Q: How to remove and install fuel injectors and Fuel Rail on BMW 328i?
A:
To disconnect the negative battery cable, relieve fuel system pressure, and remove the engine cover, strut tower cross brace, and sound insulator. Remove ignition coils and high pressure fuel line. Disconnect the electrical connector to the high pressure sensor and loosen the high-pressure fuel pipe unions. Loosen fuel rail bolts and rotate the fuel rail to clear the injectors. Disconnect the electrical connectors from the injectors and remove the ground wire. Remove the hold-down elements and clean the area. Remove the injectors from the cylinder head and place plastic caps over each. Remove the coupling element from each injector and cut the Teflon ring. Clean the injector nozzle and install new Teflon rings if reusing the injectors. Program the adjustment values for new injectors. Install the injectors and tighten the coupling element bolts. Reconnect the high-pressure pipe unions. Tighten the injector clamp bolts and T-shaped coupling element mounting bolts. Reinstall the high-pressure Fuel Pump lines, ignition coils, and remaining components. For the 3.0L engine, remove the plastic cover, disconnect the fuel feed pipe, and remove the electrical connector strip. Remove the fuel rail and injectors as an assembly. Lubricate the fuel injector O-rings and install them to the fuel rail with the clips. Reverse the removal steps.