New connecting link nuts will be required on installation. Begin by firmly applying the parking brake, then raise the front of the vehicle and support it securely on jackstands. Proceed to unscrew the retaining nut, then free the Sway Bar Link from the
Sway Bar Kit using a second wrench to counter-hold the link ball joint stud. Next, loosen and remove the nut securing the link to the suspension strut, using a second wrench to counter-hold the link ball joint stud. It's important to check the Sway Bar Link ball joints for signs of wear. Ensure that each ball joint is free to move easily, and that the rubber boots are undamaged. If necessary, replace the Sway Bar Link. Installation is the reverse of removal, using new nuts and tightening them to the specified torque setting.