Q: Where is the brake light switch located and how do you remove and install it?A: The brake light switch is located on the pedal bracket behind the instrument panel. To remove it, loosen and remove the retaining bolts securing the driver's side knee bolster panel, unclip the panel, and disconnect any electrical connectors. Reach up behind the instrument panel and disconnect the wiring connector from the switch. Pull the switch from the mounting, and if necessary, depress the clips and withdraw the switch mounting from the pedal bracket. To install the switch, fully depress the brake pedal and hold it down, then install the mount and maneuver the switch into position. Push the switch fully into position and slowly release the brake pedal to allow for automatic adjustment. Reconnect the electrical connector and check the operation of the brake lights. Finally, install the driver's side knee bolster panel.