How to remove the Center Console Base, shift knob/boots, trim panels, and associated electrical connections on BMW 428i?

Remove shift knob per 250 Gearshift Linkage; for manual transmissions the shift boot may be rubber or leather depending on year, remove a rubber boot by releasing the rim at the bottom and remove a leather boot by grasping the material and pulling up to release tabs, taking care not to break retaining tabs; for automatic transmissions use a plastic prying tool to lift and remove the trim panel, lift off the switch panel near the shifter and disconnect any electrical connections; using a plastic prying tool lift the Center Console Base trim to pop off trim clips and disconnect electrical connections; remove the left side switch panel by unclipping it from trim before prying, reach beneath the front section of the switch inside the Center Console Base, depress the front latch mechanism at the approximate location and raise the panel, disconnect the electrical connector and remove; remove screws and lift off trim from clips, pry the trim panel off in the indicated direction and disconnect all electrical connections; remove the handbrake lever cover using a pry tool if necessary by pulling up at the arrows and cut cable ties underneath holding the cover to the lever; remove fasteners at the rear of the console and disconnect electrical connectors, release fasteners at the front of the console and disconnect electrical harnesses from the Center Console Base; raise the Center Console Base at the rear while feeding the parking brake lever boot through the opening, disconnect electrical connectors and remove the Center Console Base; for installation reverse removal and ensure the wiring harness is in the correct position, insert Center Console Base guides into the dashboard, connect electrical connectors, replace any damaged panel clips and install zip ties on the parking brake lever with eyelets facing down.

Genuine BMW 428i Center Console Base

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Series

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

9 Center Console Bases found

View related parts
BMW 428i Carrier, Centre Console
Part Number: 51169360528
$457.62 MSRP: $559.71
You Save: $102.09 (19%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Console Body
- Replaces: 51-16-9-235-473
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 2014-2016 BMW 428i | Convertible N20 Engine(F33), Convertible N26 Engine(F33), Convertible(F33), Coupe N20 Engine(F32), Coupe N26 Engine(F32)
View related parts
BMW 428i Carrier, Centre Console
Part Number: 51169360529
$457.62 MSRP: $559.71
You Save: $102.09 (19%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Console Body
- Replaces: 51-16-9-235-474
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 2014-2016 BMW 428i | Convertible N20 Engine(F33), Convertible N26 Engine(F33), Convertible(F33), Coupe N20 Engine(F32), Coupe N26 Engine(F32)
View related parts
BMW 428i Carrier, Centre Console
Part Number: 51169360522
$457.62 MSRP: $559.71
You Save: $102.09 (19%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Console Body
- Replaces: 51-16-9-235-467
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 2014-2016 BMW 428i | Convertible N20 Engine(F33), Convertible N26 Engine(F33), Convertible(F33), Coupe N20 Engine(F32), Coupe N26 Engine(F32)
View related parts
BMW 428i Carrier, Centre Console
Part Number: 51169235475
$343.23 MSRP: $419.80
You Save: $76.57 (19%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Console Body
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 2014-2016 BMW 428i | Convertible N20 Engine(F33), Convertible N26 Engine(F33), Convertible(F33), Coupe N20 Engine(F32), Coupe N26 Engine(F32)
View related parts
BMW 428i Carrier, Centre Console
Part Number: 51169360523
$457.62 MSRP: $559.71
You Save: $102.09 (19%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Console Body
- Replaces: 51-16-9-235-468
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 2014-2016 BMW 428i | Convertible N20 Engine(F33), Convertible N26 Engine(F33), Convertible(F33), Coupe N20 Engine(F32), Coupe N26 Engine(F32)
View related parts
BMW 428i Carrier, Centre Console
Part Number: 51169235474
$457.62 MSRP: $559.71
You Save: $102.09 (19%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Replaced by: 51169360529
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 2014-2016 BMW 428i | Convertible N20 Engine(F33), Convertible N26 Engine(F33), Convertible(F33), Coupe N20 Engine(F32), Coupe N26 Engine(F32)
View related parts
BMW 428i Carrier, Centre Console
Part Number: 51169235473
$457.62 MSRP: $559.71
You Save: $102.09 (19%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Replaced by: 51169360528
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 2014-2016 BMW 428i | Convertible N20 Engine(F33), Convertible N26 Engine(F33), Convertible(F33), Coupe N20 Engine(F32), Coupe N26 Engine(F32)
View related parts
BMW 428i Carrier, Centre Console
Part Number: 51169235468
$457.62 MSRP: $559.71
You Save: $102.09 (19%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Replaced by: 51169360523
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 2014-2016 BMW 428i | Convertible N20 Engine(F33), Convertible N26 Engine(F33), Convertible(F33), Coupe N20 Engine(F32), Coupe N26 Engine(F32)
View related parts
BMW 428i Carrier, Centre Console
Part Number: 51169235467
$457.62 MSRP: $559.71
You Save: $102.09 (19%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Replaced by: 51169360522
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 2014-2016 BMW 428i | Convertible N20 Engine(F33), Convertible N26 Engine(F33), Convertible(F33), Coupe N20 Engine(F32), Coupe N26 Engine(F32)

BMW 428i Center Console Base

The BMW 428i Center Console Base adds to how useful and well-organized the interior of these cars is. Due to its reliable performance, the Center Console Base keeps phones, keys, and money easy to reach, helping to eliminate unnecessary clutter while the person is driving. People who care about efficiency and safety can find this feature handy because it lets them get food or drinks without losing attention to what's happening on the road. Since it can fit in any of the 428i body options, coupe, convertible, and gran coupe, the Center Console Base has been built to blend smoothly into the car's interior. Many improvements in the Center Console Base over the years reflect the brand's attention to making driving enjoyable, with features that offer a clear market advantage. This component is a significant detail in making the BMW 428i both sporty and stylish. Thanks to its strong structure and useful design, the Center Console Base helps the vehicle's functionality and reflects the brand's outstanding reputation. All in all, it plays a major role in making the 428i safer, more effective, and more comfortable to drive, which is why it is a valuable addition to any BMW.

If you are looking for OEM BMW 428i Center Console Base, we highly recommend to shop with us. Not only do we offer budget friendly prices, but we also provide fast delivery. In addition, we have a hassle-free return policy on all genuine BMW 428i Center Console Base that come backed by the manufacturer's warranty.

BMW 428i Center Console Base Parts Questions & Experts Answers

Carrier, Centre Console
51169235467
Q: How to remove the Center Console Base, shift knob/boots, trim panels, and associated electrical connections on BMW 428i?
A:
Remove shift knob per 250 Gearshift Linkage; for manual transmissions the shift boot may be rubber or leather depending on year, remove a rubber boot by releasing the rim at the bottom and remove a leather boot by grasping the material and pulling up to release tabs, taking care not to break retaining tabs; for automatic transmissions use a plastic prying tool to lift and remove the trim panel, lift off the switch panel near the shifter and disconnect any electrical connections; using a plastic prying tool lift the Center Console Base trim to pop off trim clips and disconnect electrical connections; remove the left side switch panel by unclipping it from trim before prying, reach beneath the front section of the switch inside the Center Console Base, depress the front latch mechanism at the approximate location and raise the panel, disconnect the electrical connector and remove; remove screws and lift off trim from clips, pry the trim panel off in the indicated direction and disconnect all electrical connections; remove the handbrake lever cover using a pry tool if necessary by pulling up at the arrows and cut cable ties underneath holding the cover to the lever; remove fasteners at the rear of the console and disconnect electrical connectors, release fasteners at the front of the console and disconnect electrical harnesses from the Center Console Base; raise the Center Console Base at the rear while feeding the parking brake lever boot through the opening, disconnect electrical connectors and remove the Center Console Base; for installation reverse removal and ensure the wiring harness is in the correct position, insert Center Console Base guides into the dashboard, connect electrical connectors, replace any damaged panel clips and install zip ties on the parking brake lever with eyelets facing down.

Related BMW 428i Parts

Browse by Year

2016 Center Console Base 2015 Center Console Base 2014 Center Console Base