How to remove the steering knuckle on BMW 428i?

Raise the car and remove the front wheel. The procedure to remove the steering knuckle from the vehicle is similar to removing the front strut assembly, with the strut remaining mounted to the body. With the steering knuckle supported by a floor jack, remove the brake line holder and the fastener from the steering knuckle. Lower the floor jack and slide the steering knuckle off the strut assembly. If necessary, use BMW special tool 31 2 230 to spread the steering knuckle pinch collar. The remainder of the installation is the reverse of removal, ensuring to face the bolt head of the steering knuckle pinch bolt in the direction of travel, replace self-locking fasteners with new ones, confirm that the steering knuckle contacts the stop on the strut, and tighten bonded rubber fasteners to the final torque specification with the car on the ground and loaded. Bounce the suspension a few times before final tightening.

Genuine BMW 428i Steering Knuckle

Front Steering Knuckle

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Series

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Steering Knuckles found

View related parts
BMW 428i Steering Knuckle, Left
Part Number: 31216858313
$359.01 MSRP: $465.71
You Save: $106.70 (23%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Swivel Bearing, Camber Correction, Left; Knuckle
- Position: Driver Side
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 2014-2016 BMW 428i | Convertible N20 Engine(F33), Convertible N26 Engine(F33), Convertible(F33), Coupe N20 Engine(F32), Coupe N26 Engine(F32)
View related parts
BMW 428i Right Carrier
Part Number: 31216799098
$326.37 MSRP: $423.38
You Save: $97.01 (23%)
ADD TO CART
Product Specifications
- Other Name: Carrier, Right; Knuckle
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 2014-2016 BMW 428i | Convertible N20 Engine(F33), Convertible N26 Engine(F33), Convertible(F33), Coupe N20 Engine(F32), Coupe N26 Engine(F32)
View related parts
BMW 428i Steering Knuckle, Left
Part Number: 31216858311
$359.01 MSRP: $465.71
You Save: $106.70 (23%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Swivel Bearing, Camber Correction, Left; Knuckle
- Position: Driver Side
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 2014-2016 BMW 428i | Convertible N20 Engine(F33), Convertible N26 Engine(F33), Convertible(F33), Coupe N20 Engine(F32), Coupe N26 Engine(F32)
View related parts
BMW 428i Steering Knuckle, Right
Part Number: 31216858312
$359.01 MSRP: $465.71
You Save: $106.70 (23%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Swivel Bearing, Camber Correction, Right; Knuckle
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 2014-2016 BMW 428i | Convertible N20 Engine(F33), Convertible N26 Engine(F33), Convertible(F33), Coupe N20 Engine(F32), Coupe N26 Engine(F32)
View related parts
BMW 428i Steering Knuckle, Right
Part Number: 31216858314
$359.01 MSRP: $465.71
You Save: $106.70 (23%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Swivel Bearing, Camber Correction, Right; Knuckle
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 2014-2016 BMW 428i | Convertible N20 Engine(F33), Convertible N26 Engine(F33), Convertible(F33), Coupe N20 Engine(F32), Coupe N26 Engine(F32)
View related parts
BMW 428i Left Carrier
Part Number: 31216799097
$326.37 MSRP: $423.38
You Save: $97.01 (23%)
Product Specifications
- Other Name: Carrier, Left; Knuckle
- Position: Driver Side
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 2014-2016 BMW 428i | Convertible N20 Engine(F33), Convertible N26 Engine(F33), Convertible(F33), Coupe N20 Engine(F32), Coupe N26 Engine(F32)

BMW 428i Steering Knuckle

The BMW 428i Steering Knuckle is a critical linkage between the suspension and steering assembly together with the front wheels so as to enhance the efficiency in utilizing the wheels as part of the car. The BMW 428i Steering Knuckle is considered to be highly reliable due to its strength; it is needed for the attachment points of control arms, tie-rod ends, and wheel hubs thus allowing the components to move vertically and horizontally. This feature is important in sustaining the driving force especially for BMW cars with a 428i tag in their production; such cars include the coupe, convertible, and gran coupe models. The BMW 428i Steering Knuckle is responsible for making the manner in which the car is steered more effective while also increasing steadiness and performance which results in the superior driving that is associated with the BMW Company. Available for the 428i and compatible with rear-wheel as well as front/all-wheel drive options, the Steering Knuckle is manufactured to fit each particular model. As a result, it worn out mainly in the event of a collision damage or in extreme cases hence making it to be quite reliable. In the same regard, one of the BMW 428i Steering Knuckle peculiarities that set it apart from competitor products is its compatibility with innovative suspensions, which helps to improve handling characteristics and smoothness of the ride. As for acceleration and mileage, the BMW 428i performs truly fantastic with the help of Steering Knuckle at the rear that provides the performance BMW followers expect. In general, the BMW 428i Steering Knuckle can be regarded as a perfect example of how BMW continues to pursue the principles of ASD - all-situation, all-purpose, all-weather, and all-season - and provide driving pleasure.

If you are looking for OEM BMW 428i Steering Knuckle, we highly recommend to shop with us. Not only do we offer budget friendly prices, but we also provide fast delivery. In addition, we have a hassle-free return policy on all genuine BMW 428i Steering Knuckle that come backed by the manufacturer's warranty.

BMW 428i Steering Knuckle Parts Questions & Experts Answers

Right Carrier
31216799098
Q: How to remove the steering knuckle on BMW 428i?
A:
Raise the car and remove the front wheel. The procedure to remove the steering knuckle from the vehicle is similar to removing the front strut assembly, with the strut remaining mounted to the body. With the steering knuckle supported by a floor jack, remove the brake line holder and the fastener from the steering knuckle. Lower the floor jack and slide the steering knuckle off the strut assembly. If necessary, use BMW special tool 31 2 230 to spread the steering knuckle pinch collar. The remainder of the installation is the reverse of removal, ensuring to face the bolt head of the steering knuckle pinch bolt in the direction of travel, replace self-locking fasteners with new ones, confirm that the steering knuckle contacts the stop on the strut, and tighten bonded rubber fasteners to the final torque specification with the car on the ground and loaded. Bounce the suspension a few times before final tightening.