Genuine BMW 650i Door Moldings

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Series

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Door Moldings found

View related parts
BMW 650i Channel Cover, Short, Outer Right
Part Number: 51337221312
$112.77 MSRP: $140.49
You Save: $27.72 (20%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt Molding
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 2012-2018 BMW 650i | Convertible(F12), Coupe(F13)
View related parts
BMW 650i Channel Cover, Short, Outer Left
Part Number: 51337221311
$112.77 MSRP: $140.49
You Save: $27.72 (20%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt Molding
- Position: Driver Side
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 2012-2018 BMW 650i | Convertible(F12), Coupe(F13)
View related parts
BMW 650i Channel Cover, Short, Outer Right
Part Number: 51337221310
$94.00 MSRP: $117.10
You Save: $23.10 (20%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt Molding
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 2012-2018 BMW 650i | Convertible(F12), Coupe(F13)
View related parts
BMW 650i Channel Cover, Short, Outer Left
Part Number: 51337221309
$94.00 MSRP: $117.10
You Save: $23.10 (20%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt Molding
- Position: Driver Side
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 2012-2018 BMW 650i | Convertible(F12), Coupe(F13)
View related parts
BMW 650i Channel Cover, Short, Outer Right
Part Number: 51337275788
$120.12 MSRP: $152.19
You Save: $32.07 (22%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt Molding
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 2012-2018 BMW 650i | Convertible(F12), Coupe(F13)
View related parts
BMW 650i Channel Cover, Short, Outer Left
Part Number: 51337275787
$120.12 MSRP: $152.19
You Save: $32.07 (22%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt Molding
- Position: Driver Side
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 2012-2018 BMW 650i | Convertible(F12), Coupe(F13)

BMW 650i Door Moldings

The BMW 650i Door Moldings create a robust first line of defense against unsightly dents from the car park and inclement weather. These Door Moldings run the full length of the wide part of each door, absorbing the parking lot bumps before your paint gets damaged. As an added benefit, they seal snugly to help block moisture and dust from getting into your sensitive locks. Every BMW 650i produced across the E63 coupe, E64 convertible, and later F13 bodies uses the same clip-anchored mounting pattern, so drivers trust the assembly. Replacing worn Door Moldings for new factory items is fast and secure with no drilling or improvisation required. The exterior body cladding helps smooth the airflow over the body to take the load off the robust 4.8 and 5.0 liter engines. By limiting the entry of dirt, the Door Moldings enhance the efficiency of the drivetrain in the long run. Clean hinges and latch sensors react more quickly to stability control demands. Safety benefits continue even in tight parking due to the Door Moldings' pronounced edge guards. These guards cushion against the car doors of neighboring cars. They also greatly reduce the chances of sharp chips. Such chips can trigger the spread of corrosion. As the parts have a plastic, stainless, or shiny chrome appearance, the owners can have a finish that matches the M Sport trim without disrupting the elegant BMW design language. Their product is known for consistent quality standards and reliability. The UV resistant coating does not lose color even after thousands of spirited 650i kilometers. The Door Moldings are proven pressure test worthy according to clip tests. They prove to be autobahn durable, which relates to their performance pedigree. This mirrors the chassis agility one expects from a BMW. BMW owners realize that every 650i coupe, 650i cabrio, and 650i Gran Coupe accepts Door Moldings with ease, keeping each BMW pristine.

If you are looking for OEM BMW 650i Door Moldings, we highly recommend to shop with us. Not only do we offer budget friendly prices, but we also provide fast delivery. In addition, we have a hassle-free return policy on all genuine BMW 650i Door Moldings that come backed by the manufacturer's warranty.