How do you replace the rack boot on BMW X5?

Raise the front of the car and remove the road wheel, followed by the splash shield underneath the engine. Make a length reference mark on the tie rod before removing the outer tie rod end. Cut the rack and pinion boot band clamps and slide off the boot, inspecting it for any signs of damage and replacing it if necessary. A new rack and pinion boot kit includes new band clamps. Grease the tie rod taper to ensure the small end of the rack and pinion boot slides on the tie rod when tightened, preventing the boot from twisting. Slide the new boot into position and replace the band clamps, then reinstall the tie rod end using the previously made reference marks. After reassembling the steering, have the car professionally aligned and carry out the steering angle sensor adjustment using a BMW scan tool.

Genuine BMW X5 Rack and Pinion Boot

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Series

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Rack and Pinion Boots found

View related parts
BMW X5 Repair Kit Bellows
Part Number: 32106779622
$126.68 MSRP: $185.41
You Save: $58.73 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Boot, Boot Kit, Tie Rod Boot
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 2007-2018 BMW X5 | 3.0si(E70), 4.8i(E70), xDrive30i(E70), xDrive35d(E70), xDrive35d(F15), xDrive35i(E70), xDrive35i(F15), xDrive48i(E70), xDrive50i(E70), xDrive50i(F15)
View related parts
BMW X5 Repair Kit Bellows
Part Number: 32136751026
$88.56 MSRP: $127.45
You Save: $38.89 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Boot, Boot Kit, Tie Rod Boot
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 2000-2006 BMW X5 | 3.0i(E53), 4.4i(E53), 4.6is(E53), 4.8is(E53)
View related parts
BMW X5 Repair Kit Bellows
Part Number: 32106865426
$61.28 MSRP: $86.74
You Save: $25.46 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Boot, Boot Kit, Tie Rod Boot
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 2014-2018 BMW X5 | sDrive35i(F15), xDrive35d(F15), xDrive35i(F15), xDrive40e(F15), xDrive50i(F15)
View related parts
BMW X5 REPAIR KIT BELLOWS
Part Number: 32106890060
$61.28 MSRP: $86.74
You Save: $25.46 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Boot, Boot Kit, Tie Rod Boot
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 2019-2024 BMW X5 | 6 Cyl 3.0 L GAS, 6 Cyl 3.0 L MILD HYBRID EV-GAS (MHEV), 6 Cyl 3.0 L PLUG-IN HYBRID EV-GAS (PHEV), 8 Cyl 4.4 L GAS, 8 Cyl 4.4 L MILD HYBRID EV-GAS (MHEV), M50i(G05), xDrive40i(G05), xDrive50i(G05)

BMW X5 Rack and Pinion Boot

Thus, the BMW X5 Rack and Pinion Boot illustrates the line's focus on reliability and performance. Being the protective rubber cover of the steering rack, the Rack and Pinion Boot plays the role of the shield that protects the steering mechanism in numerous models of X5 from such factors as dirt and contamination. This vital part covers the ends of the rack well, avoiding any form of destruction and thus adding to the competency and security of the equipment while in use. Being compatible with the numerous generations of BMW X5, E53, F15, G05 included, Rack and Pinion Boot is created to withstand the challenges. This is because it has a significance service in ensuring that the steering system of a vehicle remains operational because it is among the components that help in determining the performance of a car. In particular, one must mention Rack and Pinion Boot as a product that is viewed as unique due to its materials and design, which guarantee the flawless functioning of the spare parts. The fact that the manufacturer responds to such minute matters bears testimony once again to BMW's definitive standards emphasizing the importance of the part as a much desired addition to the BMW X5. This Rack and Pinion Boot enables driver to drive the vehicle with assurance that steering mechanism is well protected and optimally performing.

If you are looking for OEM BMW X5 Rack and Pinion Boot, we highly recommend to shop with us. Not only do we offer budget friendly prices, but we also provide fast delivery. In addition, we have a hassle-free return policy on all genuine BMW X5 Rack and Pinion Boot that come backed by the manufacturer's warranty.

BMW X5 Rack and Pinion Boot Parts Questions & Experts Answers

Repair Kit Bellows
32136751026
Q: How do you replace the rack boot on BMW X5?
A:
Raise the front of the car and remove the road wheel, followed by the splash shield underneath the engine. Make a length reference mark on the Tie Rod before removing the outer tie rod end. Cut the rack and pinion boot band clamps and slide off the boot, inspecting it for any signs of damage and replacing it if necessary. A new rack and pinion boot kit includes new band clamps. Grease the tie rod taper to ensure the small end of the rack and pinion boot slides on the tie rod when tightened, preventing the boot from twisting. Slide the new boot into position and replace the band clamps, then reinstall the tie rod end using the previously made reference marks. After reassembling the steering, have the car professionally aligned and carry out the steering angle sensor adjustment using a BMW scan tool.

Genuine BMW X5 Rack and Pinion Boot

4 Rack and Pinion Boots found

BMW X5 Repair Kit Bellows

BMW X5 Repair Kit Bellows

BMW X5 Repair Kit Bellows

BMW X5 REPAIR KIT BELLOWS

BMW X5 Rack and Pinion Boot

BMW X5 Rack and Pinion Boot Parts Questions & Experts Answers

Browse by Year