How to safely remove and install the intake and exhaust camshafts in 3.0L six cylinder engine on BMW 325i?

The removal and replacement of camshafts require many specialized tools. The intake camshaft is removed by first removing the Valvetronic intermediate levers, turning the eccentric shaft while at the same time removing the oil spray nozzle. Removal of VANOS adjustment units should also be carried out. Then, carefully remove guide blocks, return springs and Valvetronic intermediate levers in a laid order respectively. Remove bearing caps together with guide blocks followed by intermediate levers. Next, the camshaft may be lifted out and then compression rings as well as rocker arms are to be taken off it. In order to take out exhaust camshaft, there must be dismantling of upper and lower camshaft bearing castings first. Both camshafts should be inspected for wear or damage before being installed down into their place on cylinder head again.To fix intake camshaft hydraulic adjusters and rocker arms must be installed; after that lubricate it and put it up with cylinder 1 lobe in top position (up). Install camshaft bearing caps before placing intermediate levers back into its place followed by guide blocks after them.This should be done along with installation of tension springs on special appliances so as to stretch them properly while tightening retaining bolts slightly downwards.The oil spray nozzle should also fit into position perfectly well.Slightly open up exhaust valves of cylinder no2 during installing process on this case, put back exhaust camshaft together with bearing castings aligning as well fastening holding screws correctly.Finally, install VANOS adjustment units.

Genuine BMW 325i Camshaft

Cam

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Series

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

9 Camshafts found

View related parts
BMW 325i Outlet Camshaft
Part Number: 11311738371
$490.54 MSRP: $661.89
You Save: $171.35 (26%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Camshaft
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 1992-1995 BMW 325i | Convertible(E36), Sedan(E36)
View related parts
BMW 325i Inlet Camshaft
Part Number: 11311735895
$560.46 MSRP: $756.23
You Save: $195.77 (26%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Camshaft
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 1992-1995 BMW 325i | Convertible(E36), Sedan(E36)
View related parts
BMW 325i Outlet Camshaft
Part Number: 11311435416
$568.69 MSRP: $767.34
You Save: $198.65 (26%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Camshaft
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 2001-2005 BMW 325i | Sedan M54 Engine(E46), Sedan M56 Engine(E46), Sedan(E46), Wagon M54 Engine(E46), Wagon M56 Engine(E46), Wagon(E46)
View related parts
BMW 325i Outlet Camshaft
Part Number: 11317563665
$872.36 MSRP: $1076.19
You Save: $203.83 (19%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Camshaft
- Replaces: 11-31-7-527-760, 11-31-7-550-557
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 2006 BMW 325i | Sedan(E90)
View related parts
BMW 325i Inlet Camshaft
Part Number: 11311438079
$568.69 MSRP: $767.34
You Save: $198.65 (26%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Camshaft
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 2001-2005 BMW 325i | Sedan M54 Engine(E46), Sedan M56 Engine(E46), Sedan(E46), Wagon M54 Engine(E46), Wagon M56 Engine(E46), Wagon(E46)
View related parts
BMW 325i Inlet Camshaft
Part Number: 11317563663
$872.36 MSRP: $1076.19
You Save: $203.83 (19%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Camshaft
- Replaces: 11-31-7-516-032
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 2006 BMW 325i | Sedan(E90)
View related parts
BMW 325i Outlet Camshaft
Part Number: 11311718886
$490.54 MSRP: $661.89
You Save: $171.35 (26%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Camshaft
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 1992-1995 BMW 325i | Sedan(E36)
View related parts
BMW 325i Inlet Camshaft
Part Number: 11311718885
$560.46 MSRP: $756.23
You Save: $195.77 (26%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Camshaft
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 1992-1995 BMW 325i | Sedan(E36)
View related parts
BMW 325i Camshaft
Part Number: 11311716138
$645.21 MSRP: $870.59
You Save: $225.38 (26%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Camshaft Camshaft
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 1987-1992 BMW 325i | Convertible(E30), Coupe(E30), Sedan(E30)

BMW 325i Camshaft

The BMW 325i Camshaft is the unique part amongst the automobile components, which boost up the car's performance and durability of the model due to its superior engineering features. This Camshaft helps to improve the engine's power and torque to give the 325i 168 horsepower and 222 Nm of torque; a dynamism to its drive. The Camshaft is always important for the performance of the engine and generally contributes to the performance of the vehicle in question. Designed for different models, this Camshaft is tailored to meet every car model's needs, so extra performances can be unleashed by its drivers easily. Also, the Camshaft operation promotes better fuel economy and therefore can be an asset for those who value power as well as economic characteristics. Safety is also an important factor in BMW automobiles including the 325i Camshaft since it is in direct interaction with safety embellishments such as the anti-locking breaking system and dynamic stability control. It is important to understand that amid the variety of automotive products, the BMW 325i Camshaft stands out because of its precise manufacture and the possibility to provide maximal efficiency in every type of road conditions. But this Camshaft also builds up a literal testimonial on the BMW 325 for being reliable and at the same time boosting its performance, making it one of the optimal choices for both race car drivers and normal car users.

If you are looking for OEM BMW 325i Camshaft, we highly recommend to shop with us. Not only do we offer budget friendly prices, but we also provide fast delivery. In addition, we have a hassle-free return policy on all genuine BMW 325i Camshaft that come backed by the manufacturer's warranty.

BMW 325i Camshaft Parts Questions & Experts Answers

Inlet Camshaft
11317563663
Q: How to safely remove and install the intake and exhaust camshafts in 3.0L six cylinder engine on BMW 325i?
A:
The removal and replacement of camshafts require many specialized tools. The intake camshaft is removed by first removing the Valvetronic intermediate levers, turning the eccentric shaft while at the same time removing the oil spray nozzle. Removal of VANOS adjustment units should also be carried out. Then, carefully remove guide blocks, return springs and Valvetronic intermediate levers in a laid order respectively. Remove bearing caps together with guide blocks followed by intermediate levers. Next, the camshaft may be lifted out and then compression rings as well as rocker arms are to be taken off it. In order to take out exhaust camshaft, there must be dismantling of upper and lower camshaft bearing castings first. Both camshafts should be inspected for wear or damage before being installed down into their place on cylinder head again.To fix intake camshaft hydraulic adjusters and rocker arms must be installed; after that lubricate it and put it up with cylinder 1 lobe in top position (up). Install camshaft bearing caps before placing intermediate levers back into its place followed by guide blocks after them.This should be done along with installation of tension springs on special appliances so as to stretch them properly while tightening retaining bolts slightly downwards.The oil spray nozzle should also fit into position perfectly well.Slightly open up exhaust valves of cylinder no2 during installing process on this case, put back exhaust camshaft together with bearing castings aligning as well fastening holding screws correctly.Finally, install VANOS adjustment units.