How to remove and install the rear hub bearing on BMW 325i?

Remove the rear hub. Remove the hub bearing retaining snap ring from the trailing arm. Tap the hub bearing out from the hub carrier using a hammer and suitable punch. Thoroughly clean the hub carrier bore, removing all traces of dirt and grease, and polish away any burrs or raised edges which might hinder reassembly. Replace the snap-ring if there is any doubt about its condition. On reassembly, apply a light film of clean engine oil to the bearing outer race to aid installation. Place the bearing in the hub carrier and tap it fully into position, ensuring that it enters the carrier squarely, using a suitable tubular spacer which bears only on the bearing outer race. Secure the bearing in position with the snap-ring, making sure it is correctly positioned in the hub carrier groove. Install the rear hub.

Genuine BMW 325i Wheel Bearing

Hub Bearing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Series

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Wheel Bearings found

View related parts
BMW 325i Wheel Hub With Bearing, Front
Part Number: 31216765157
$263.93 MSRP: $389.60
You Save: $125.67 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Front Hub & Bearing, Hub & Bearing, Hub Assembly
- Position: Front
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 2006 BMW 325i | Sedan(E90)
View related parts
BMW 325i Angular Contact Ball Bearing,Radial
Part Number: 33416762317
$97.33 MSRP: $135.40
You Save: $38.07 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing, Rear Wheel Bearing, Wheel Bearing
- Replaces: 33-41-7-749-628
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 2001-2006 BMW 325i | Sedan M54 Engine(E46), Sedan M56 Engine(E46), Sedan(E46), Sedan(E90), Wagon M54 Engine(E46), Wagon M56 Engine(E46), Wagon(E46)
- 1987-1992 BMW 325i | Convertible(E30), Coupe(E30), Sedan(E30)
View related parts
BMW 325i Angular Contact Ball Bearing,Radial
Part Number: 33411130617
$93.66 MSRP: $126.10
You Save: $32.44 (26%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Replaced by: 33412220987
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 1992-1995 BMW 325i | Convertible(E36), Sedan(E36)
View related parts
BMW 325i Wheel Hub With Bearing, Front
Part Number: 31211131297
$278.58 MSRP: $326.73
You Save: $48.15 (15%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Position: Front
- Replaced by: 31211129576
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 1987-1992 BMW 325i | Convertible(E30), Coupe(E30), Sedan(E30)
View related parts
BMW 325i Angular Contact Ball Bearing,Radial
Part Number: 33411124358
$105.34 MSRP: $107.23
You Save: $1.89 (2%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Replaces: 33-41-1-468-928
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 1992-1995 BMW 325i | Convertible(E36), Sedan(E36)
View related parts
BMW 325i Service Kit, Wheel Bearing, Rear
Part Number: 33412220987
$93.66 MSRP: $126.10
You Save: $32.44 (26%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Position: Rear
- Replaces: 33-41-1-468-747, 33-41-1-130-617
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 2001-2005 BMW 325i | Sedan M54 Engine(E46), Sedan M56 Engine(E46), Sedan(E46), Wagon M54 Engine(E46), Wagon M56 Engine(E46), Wagon(E46)
- 1992-1995 BMW 325i | Convertible(E36), Sedan(E36)

BMW 325i Wheel Bearing

If you are looking for OEM BMW 325i Wheel Bearing, we highly recommend to shop with us. Not only do we offer budget friendly prices, but we also provide fast delivery. In addition, we have a hassle-free return policy on all genuine BMW 325i Wheel Bearing that come backed by the manufacturer's warranty.

BMW 325i Wheel Bearing Parts Questions & Experts Answers

Angular Contact Ball Bearing,Radial
33416762317
Q: How to remove and install the rear hub bearing on BMW 325i?
A:
Remove the rear hub. Remove the hub bearing retaining snap ring from the Trailing Arm. Tap the hub bearing out from the hub carrier using a hammer and suitable punch. Thoroughly clean the hub carrier bore, removing all traces of dirt and grease, and polish away any burrs or raised edges which might hinder reassembly. Replace the snap-ring if there is any doubt about its condition. On reassembly, apply a light film of clean engine oil to the bearing outer race to aid installation. Place the bearing in the hub carrier and tap it fully into position, ensuring that it enters the carrier squarely, using a suitable tubular spacer which bears only on the bearing outer race. Secure the bearing in position with the snap-ring, making sure it is correctly positioned in the hub carrier groove. Install the rear hub.