The procedure may vary slightly based on vehicle model year and options. For vehicles with Xenon headlights, begin by removing the headlight fuse(s). Next, take off the wheel housing trim, followed by the front bumper cover. If equipped, remove the high-pressure nozzle for the headlight washer system. From underneath the wheel housing arch, remove the screw on the headlight arm. In front of the headlight, remove the mounting screws for the headlight assembly, detach the wiring harness fastener on the headlight arm, and remove the high-pressure line and wiring harness. Pull the headlight out slightly and disconnect the harness connector at the back, then remove the headlight in the indicated direction. During installation, ensure to set the gaps from the top (below the fender) and bottom (above the bumper cover) according to specifications, and adjust the headlight aim once the installation is complete.