How to remove and install the fuel injectors and fuel rail in the six cylinder engine on BMW X3?

To remove and install the fuel rail and injectors, first ensure the ignition is switched OFF and the key is removed. For a quick check of the injectors, run the engine and touch each injector with a screwdriver or stethoscope to feel a vibration or hear a buzzing, then switch the engine OFF. Disconnect the battery negative cable, taking care to read the battery disconnection cautions beforehand. Remove the upper engine covers, then detach the oxygen sensor connectors and unclip the wiring harness from its holder, marking the connectors for reassembly. Unclip the oxygen sensor connector harness from the fuel rail and remove the Schrader valve cap from the fuel rail. Unscrew the fuel tank cap to release pressure and use a brief burst of compressed air to blow fuel back into the tank. At the fuel rail, remove the fuel line by pressing the release clip and pulling the line off. Remove the fasteners to take out the fuel rail, then pry the retaining clip from each injector and pull the injectors from the rail. For installation, reverse the removal steps, ensuring to fit new sealing O-rings on the injectors, lightly lubricating them for ease of installation. Check that the injector electrical connections are correctly fitted and that the injectors are fully seated before installing the fuel rail mounting bolts and replacing wire ties. After reinstalling, check and clear any fault codes from the ECM memory.

Genuine BMW X3 Fuel Rail

Engine Fuel Rail

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Series

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

15 Fuel Rails found

View related parts
BMW X3 High-Pressure Rail
Part Number: 13537585411
$320.66 MSRP: $442.81
You Save: $122.15 (28%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fuel Rail
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 2013-2017 BMW X3 | sDrive28i(F25), xDrive28i(F25)
View related parts
BMW X3 Injection Tube
Part Number: 13537542541
$487.08 MSRP: $637.30
You Save: $150.22 (24%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fuel Rail
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 2007-2012 BMW X3 | 3.0si(E83), xDrive28i(F25)
View related parts
BMW X3 High-Pressure Rail
Part Number: 13537643082
$336.72 MSRP: $464.98
You Save: $128.26 (28%)
ADD TO CART
Product Specifications
- Replaced by: 13538665635
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 2018-2019 BMW X3 | M40i(G01)
View related parts
BMW X3 High-Pressure Rail
Part Number: 13537649710
$641.06 MSRP: $790.84
You Save: $149.78 (19%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fuel Rail
- Replaces: 13-53-7-628-049
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 2011-2017 BMW X3 | xDrive35i(F25)
View related parts
BMW X3 High-Pressure Rail
Part Number: 13537628049
$641.06 MSRP: $790.84
You Save: $149.78 (19%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Replaced by: 13537649710
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 2011-2017 BMW X3 | xDrive35i(F25)
View related parts
BMW X3 HIGH-PRESSURE RAIL
Part Number: 13538698787
$336.72 MSRP: $464.98
You Save: $128.26 (28%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fuel Rail
- Replaced by: 13538665631
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 2020 BMW X3 | M40i(G01)
View related parts
BMW X3 High-Pressure Rail
Part Number: 13538694198
$336.72 MSRP: $464.98
You Save: $128.26 (28%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: FUEL RAIL
- Replaces: 13-53-7-639-979
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 2018-2019 BMW X3 | sDrive30i(G01), xDrive30i(G01)
View related parts
BMW X3 HIGH-PRESSURE RAIL
Part Number: 13538665633
$336.72 MSRP: $464.98
You Save: $128.26 (28%)
ADD TO CART
Product Specifications
- Other Name: Fuel Rail
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 2020-2024 BMW X3 | 4 Cyl 2.0 L GAS, 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV), sDrive30i(G01), xDrive30e(G01), xDrive30i(G01)
View related parts
BMW X3 HIGH-PRESSURE RAIL
Part Number: 13538665631
$336.72 MSRP: $464.98
You Save: $128.26 (28%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fuel Rail
- Replaces: 13-53-8-698-787
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 2020-2024 BMW X3 | 6 Cyl 3.0 L GAS, 6 Cyl 3.0 L MILD HYBRID EV-GAS (MHEV), M40i(G01)
View related parts
BMW X3 High-Pressure Rail
Part Number: 13537639979
$336.72 MSRP: $464.98
You Save: $128.26 (28%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Replaced by: 13538694198
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 2018-2019 BMW X3 | xDrive30i(G01)
View related parts
BMW X3 Pressure Accumulator
Part Number: 13537800601
$635.87 MSRP: $885.66
You Save: $249.79 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fuel Rail
- Replaces: 13-53-7-809-128
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 2015-2017 BMW X3 | xDrive28d(F25)
View related parts
BMW X3 High-Pressure Rail
Part Number: 13538694197
$320.66 MSRP: $442.81
You Save: $122.15 (28%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fuel Rail
- Replaces: 13-53-7-639-975
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 2018-2019 BMW X3 | M40i(G01)
View related parts
BMW X3 High-Pressure Rail
Part Number: 13537639975
$320.66 MSRP: $442.81
You Save: $122.15 (28%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Replaced by: 13538694197
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 2018-2019 BMW X3 | M40i(G01)
View related parts
BMW X3 High-Pressure Rail
Part Number: 13538665635
$336.72 MSRP: $464.98
You Save: $128.26 (28%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fuel Rail
- Replaces: 13-53-7-643-082
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 2018-2024 BMW X3 | 6 Cyl 3.0 L GAS, 6 Cyl 3.0 L MILD HYBRID EV-GAS (MHEV), M40i(G01)
View related parts
BMW X3 Injection Tube
Part Number: 13537541452
$363.00 MSRP: $437.73
You Save: $74.73 (18%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fuel Rail
- Replaces: 13-53-1-437-442
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 2004-2006 BMW X3 | 2.5i(E83), 3.0i(E83)

BMW X3 Fuel Rail

If you are looking for OEM BMW X3 Fuel Rail, we highly recommend to shop with us. Not only do we offer budget friendly prices, but we also provide fast delivery. In addition, we have a hassle-free return policy on all genuine BMW X3 Fuel Rail that come backed by the manufacturer's warranty.

BMW X3 Fuel Rail Parts Questions & Experts Answers

Injection Tube
13537542541
Q: How to remove and install the fuel injectors and fuel rail in the six cylinder engine on BMW X3?
A:
To remove and install the fuel rail and injectors, first ensure the ignition is switched OFF and the key is removed. For a quick check of the injectors, run the engine and touch each injector with a screwdriver or stethoscope to feel a vibration or hear a buzzing, then switch the engine OFF. Disconnect the battery negative cable, taking care to read the battery disconnection cautions beforehand. Remove the upper engine covers, then detach the oxygen sensor connectors and unclip the wiring harness from its holder, marking the connectors for reassembly. Unclip the oxygen sensor connector harness from the fuel rail and remove the Schrader valve cap from the fuel rail. Unscrew the fuel tank cap to release pressure and use a brief burst of compressed air to blow fuel back into the tank. At the fuel rail, remove the fuel line by pressing the release clip and pulling the line off. Remove the fasteners to take out the fuel rail, then pry the retaining clip from each injector and pull the injectors from the rail. For installation, reverse the removal steps, ensuring to fit new sealing O-rings on the injectors, lightly lubricating them for ease of installation. Check that the injector electrical connections are correctly fitted and that the injectors are fully seated before installing the fuel rail mounting bolts and replacing wire ties. After reinstalling, check and clear any fault codes from the ECM memory.