How to remove and install the front Sway Bar Bushing, Sway Bar Kit and Sway Bar Link on BMW X3?

The Sway Bar Kit mounts to the front subframe, with the front Sway Bar Link attaching to the strut assemblies. To remove and install the Sway Bar Kit, Sway Bar Link, and Sway Bar Bushing, first raise the car and remove the front wheel. Next, remove the underbody splash shield. For the Sway Bar Bushing, fold back the wheel housing liner and remove the Sway Bar Bushing mount bolts, then slide the bushing out for removal. Installation is the reverse of removal, and it is important not to grease the bushings. For the Sway Bar Link, raise the car and remove the front wheel, then remove the Sway Bar Link mounting nut, using a thin wrench to counter hold the shaft of the Sway Bar Link ball joint while removing the nut. To remove the Sway Bar Kit, raise the car and remove the front wheel, then take off the underbody splash shield and lower the front subframe. Remove the Sway Bar Link from the Sway Bar Kit and take out the Sway Bar bracket bolts on both sides, sliding the stabilizer out from the front of the vehicle. Installation is the reverse of removal, ensuring to replace fasteners with new ones and check rubber mounts for damage, replacing them as needed.

Genuine BMW X3 Sway Bar Bushing

Stabilizer Sway Bar Bushing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Series

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

9 Sway Bar Bushings found

View related parts
BMW X3 Stabilizer Rubber Mounting
Part Number: 33506861465
$21.03 MSRP: $31.98
You Save: $10.95 (35%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bushings, Stabilizer Bar Bushing
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 2018-2024 BMW X3 | 4 Cyl 2.0 L GAS, 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV), sDrive30i(G01), xDrive30e(G01), xDrive30i(G01)
View related parts
BMW X3 Stabilizer Rubber Mounting
Part Number: 33506861466
$21.03 MSRP: $31.98
You Save: $10.95 (35%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bushings, Stabilizer Bar Bushing
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 2018-2024 BMW X3 | 6 Cyl 3.0 L GAS, 6 Cyl 3.0 L MILD HYBRID EV-GAS (MHEV), M40i(G01)
View related parts
BMW X3 Stabilizer Rubber Mounting
Part Number: 33556875401
$21.03 MSRP: $31.98
You Save: $10.95 (35%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bushings, Stabilizer Bar Bushing
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 2018-2024 BMW X3 | 4 Cyl 2.0 L GAS, 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV), sDrive30i(G01), xDrive30i(G01)
View related parts
BMW X3 Stabilizer Rubber Mounting
Part Number: 33556788063
$21.03 MSRP: $31.98
You Save: $10.95 (35%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bushings, Stabilizer Bar Bushing
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 2011-2017 BMW X3 | sDrive28i(F25), xDrive28d(F25), xDrive28i(F25), xDrive35i(F25)
View related parts
BMW X3 Stabilizer Rubber Mounting
Part Number: 33556788058
$21.03 MSRP: $31.98
You Save: $10.95 (35%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bushings, Stabilizer Bar Bushing
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 2011-2017 BMW X3 | sDrive28i(F25), xDrive28d(F25), xDrive28i(F25), xDrive35i(F25)
View related parts
BMW X3 Stabilizer Rubber Mounting
Part Number: 31303413134
$17.33 MSRP: $26.35
You Save: $9.02 (35%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bushings, Stabilizer Bar Bushing
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 2004-2010 BMW X3 | 2.5i(E83), 3.0i(E83), 3.0si(E83)
View related parts
BMW X3 Stabilizer Rubber Mounting
Part Number: 33503404616
$21.03 MSRP: $31.98
You Save: $10.95 (35%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bushings, Stabilizer Bar Bushing
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 2004-2010 BMW X3 | 2.5i(E83), 3.0i(E83), 3.0si(E83)
View related parts
BMW X3 Stabilizer Rubber Mounting
Part Number: 33503411987
$72.59 MSRP: $85.14
You Save: $12.55 (15%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bushings, Stabilizer Bar Bushing
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 2004-2010 BMW X3 | 2.5i(E83), 3.0i(E83), 3.0si(E83)
View related parts
BMW X3 Stabilizer Rubber Mounting
Part Number: 31303404065
$74.29 MSRP: $87.13
You Save: $12.84 (15%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bushings, Stabilizer Bar Bushing
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 2004-2010 BMW X3 | 2.5i(E83), 3.0i(E83), 3.0si(E83)

BMW X3 Sway Bar Bushing

The BMW X3 Sway Bar Bushing attaches the stabilizer bar to the body to help keep the crossover stable during cornering and to absorb jostling bumps that would otherwise disturb the cabin. At the front and rear suspensions, every Sway Bar Bushing holds the anti-roll bar in a rubber cushion, allowing the bar to pivot smoothly while preventing too much body roll while cornering. So long as they remain tightly fitted and lubricated, the BMW handles sharply, the X3 drives straight, and road noise is low. Across the timeline of the X3, there are two styles. One is a slightly larger front Sway Bar Bushing for heavier steering loads. The other is a smaller rear companion tuned for ride comfort. However, although larger and smaller, they are identical in their core job. Both tightly grip the bar inside a split sleeve. Over years of driving, heat and vibration can harden the compound, leading to rattles, squeaks, and slower steering response that alert owners to wear. Prompt replacement restores the planted feel that defines BMW agility. Maintaining the integrity of every Sway Bar Bushing is critical for achieving signature BMW balance and smooth, quiet ride quality even on rough pavement. This hazard is just one reason why this small Sway Bar Bushing matters.

If you are looking for OEM BMW X3 Sway Bar Bushing, we highly recommend to shop with us. Not only do we offer budget friendly prices, but we also provide fast delivery. In addition, we have a hassle-free return policy on all genuine BMW X3 Sway Bar Bushing that come backed by the manufacturer's warranty.

BMW X3 Sway Bar Bushing Parts Questions & Experts Answers

Stabilizer Rubber Mounting
31303404065
Q:
How to remove and install the front Sway Bar Bushing, Sway Bar Kit and Sway Bar Link on BMW X3?
Posted by Jorge T.
A:
The Sway Bar Kit mounts to the front subframe, with the front Sway Bar Link attaching to the strut assemblies. To remove and install the Sway Bar Kit, Sway Bar Link, and Sway Bar Bushing, first raise the car and remove the front wheel. Next, remove the underbody splash shield. For the Sway Bar Bushing, fold back the wheel housing liner and remove the Sway Bar Bushing mount bolts, then slide the bushing out for removal. Installation is the reverse of removal, and it is important not to grease the bushings. For the Sway Bar Link, raise the car and remove the front wheel, then remove the Sway Bar Link mounting nut, using a thin wrench to counter hold the shaft of the Sway Bar Link ball joint while removing the nut. To remove the Sway Bar Kit, raise the car and remove the front wheel, then take off the underbody splash shield and lower the front subframe. Remove the Sway Bar Link from the Sway Bar Kit and take out the Sway Bar bracket bolts on both sides, sliding the stabilizer out from the front of the vehicle. Installation is the reverse of removal, ensuring to replace fasteners with new ones and check rubber mounts for damage, replacing them as needed.
Answered by BMW Parts Specialist Tony / Oct 27, 2025