Where is the Vapor Canister located and how to remove it on BMW X5?

The carbon canister is mounted on the lower left side of the vehicle behind the sill. First, it is recommended that the car should be lifted off the ground and well secured in a way that will not lead to a breakdown of support mid-procedure. After that, it will be necessary to unbolt the left fuel tank underbody protection attaching bolts which are shorter located at point-A and thus the forward edge of the underbody protection panel can be dropped down down to enable the space to accommodate the fuel filter and the carbon canister. BMW special tool 16 1 050 should be used to remove the hoses from the carbon canister. After that, it is necessary to unbolt the fastener belong to the carbon canister and body and then extract the canister. The installation process is done in total reversed order of the removal process.

Genuine BMW X5 Vapor Canister

Fuel Vapor Canister

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Series

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Vapor Canisters found

View related parts
BMW X5 Activated Charcoal Filter
Part Number: 16117164407
$419.49 MSRP: $619.22
You Save: $199.73 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Canister, Vapor Canister
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 2007-2013 BMW X5 | 3.0si(E70), 4.8i(E70), xDrive30i(E70), xDrive35i(E70), xDrive48i(E70), xDrive50i(E70)
View related parts
BMW X5 Activated Charcoal Filter
Part Number: 16117327885
$419.49 MSRP: $619.22
You Save: $199.73 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Canister, Vapor Canister
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 2014-2018 BMW X5 | sDrive35i(F15), xDrive35i(F15), xDrive50i(F15)
View related parts
BMW X5 Activated Charcoal Filter
Part Number: 16137475444
$466.10 MSRP: $688.03
You Save: $221.93 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Vapor Canister
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 2019-2025 BMW X5 | 6 Cyl 3.0 L GAS, 6 Cyl 3.0 L MILD HYBRID EV-GAS (MHEV), 8 Cyl 4.4 L GAS, 8 Cyl 4.4 L MILD HYBRID EV-GAS (MHEV), M50i(G05), xDrive40i(G05), xDrive50i(G05)
View related parts
BMW X5 Activated Charcoal Filter
Part Number: 16136762410
$266.39 MSRP: $393.22
You Save: $126.83 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Vapor Canister
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 2001-2006 BMW X5 | 3.0i(E53), 4.4i(E53), 4.8is(E53)
View related parts
BMW X5 Activated Charcoal Filter
Part Number: 16117438139
$356.57 MSRP: $526.34
You Save: $169.77 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Canister, Vapor Canister
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 2016-2018 BMW X5 | xDrive40e(F15)
View related parts
BMW X5 Activated Charcoal Filter
Part Number: 16137486244
$396.19 MSRP: $584.83
You Save: $188.64 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Vapor Canister
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 2021-2025 BMW X5 | 6 Cyl 3.0 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
BMW X5 Activated Charcoal Filter
Part Number: 16131184451
$339.68 MSRP: $501.41
You Save: $161.73 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Vapor Canister
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 2000-2006 BMW X5 | 3.0i(E53), 4.4i(E53), 4.6is(E53)

BMW X5 Vapor Canister

The BMW X5 Vapor Canister traps the fumes of gasoline so it can be burned off later, reducing hydrocarbon pollution and conserving fuel. Hidden somewhere close to the tank or under the hood, this Vapor Canister is stuffed with activated charcoal whose myriad of pores trap vapors until the purge valve is opened and engine vacuum sucks the stored mix into the intake. Early BMW X5 models contained a simple Vapor Canister with a simple purge circuit and a replaceable filter. Starting with OBD II electronics, later versions of the BMW X5 have a second-generation Vapor Canister, which incorporates a vent solenoid and a fuel-tank pressure sensor that allow the engine computer to seal the system and draw vacuum to verify that there are no leaks. Despite these upgrades, both of these styles share the same charcoal core and goal of keeping raw fuel out of the air and slightly improving mileage across the X5 lineup. Overall, the Vapor Canister is mostly maintenance free, although a loose cap can fool diagnostics and light the dash to remind BMW drivers that sealing the tank still matters.

If you are looking for OEM BMW X5 Vapor Canister, we highly recommend to shop with us. Not only do we offer budget friendly prices, but we also provide fast delivery. In addition, we have a hassle-free return policy on all genuine BMW X5 Vapor Canister that come backed by the manufacturer's warranty.

BMW X5 Vapor Canister Parts Questions & Experts Answers

Activated Charcoal Filter
16131184451
Q:
Where is the Vapor Canister located and how to remove it on BMW X5?
Posted by Sachin M.
A:
The carbon canister is mounted on the lower left side of the vehicle behind the sill. First, it is recommended that the car should be lifted off the ground and well secured in a way that will not lead to a breakdown of support mid-procedure. After that, it will be necessary to unbolt the left fuel tank underbody protection attaching bolts which are shorter located at point-A and thus the forward edge of the underbody protection panel can be dropped down down to enable the space to accommodate the Fuel Filter and the carbon canister. BMW special tool 16 1 050 should be used to remove the hoses from the carbon canister. After that, it is necessary to unbolt the fastener belong to the carbon canister and body and then extract the canister. The installation process is done in total reversed order of the removal process.
Answered by BMW Parts Specialist Brandon / Jun 22, 2023