How to remove and install a windshield washer pump on BMW Z3?

The rubber grommet seals and holds the windshield washer pump in place inside the washer reservoir. To remove it, begin by disconnecting its electrical connector. The wiper fluid container should be emptied or a drain pan used to collect any liquid that might be lost when the pump is taken off. If you are taking out the pump from the reservoir ensure that you take it out with caution so as not to damage the sealant grommet. Before you go ahead and install it back, examine carefully its sealing grommet made of rubber and if it has any cracks, brittleness or damage replace it outrightly. Finally lubricate this rubber grommet using washing fluid or even mild liquid soap product. Press both pick up and pump assembly into the reservoir ensuring they are fully seated. Lastly refill your reservoir then check for leaks of fluid on normal operation.

Genuine BMW Z3 Washer Pump

Windshield Washer Pump

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Series

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Washer Pumps found

View related parts
BMW Z3 Washer Pump
Part Number: 67128362154
$62.13 MSRP: $87.95
You Save: $25.82 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Wash Pump; Rear Washer Pump
- Replaces: 67-12-8-377-612
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 1996-2002 BMW Z3 | 1.9L Engine(E36), 2.8L Engine(E36), Roadster 1.9L(E36), Roadster 2.5L(E36), Roadster 2.8L(E36), Roadster 3.0L(E36), Roadster(E36)
View related parts
BMW Z3 Double Wash Pump
Part Number: 67128377987
$86.37 MSRP: $98.49
You Save: $12.12 (13%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Washer Pump
- Replaces: 67-12-6-938-620
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 1999-2002 BMW Z3 | Coupe(E36)
View related parts
BMW Z3 Washer Pump
Part Number: 61661377830
$75.41 MSRP: $92.40
You Save: $16.99 (19%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Wash Pump/Fluid Container
- Position: Driver Side
- Replaces: 61-66-8-360-614, 67-12-8-360-244, 61-66-1-380-068, 61-66-1-380-066
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 1996-2000 BMW Z3 | 1.9L Engine(E36), 2.8L Engine(E36), Roadster 1.9L(E36), Roadster 2.8L(E36), Roadster(E36)
View related parts
BMW Z3 Washer Pump
Part Number: 61661380068
$75.41 MSRP: $92.40
You Save: $16.99 (19%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Wash Pump
- Replaced by: 61661377830
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 1996-2000 BMW Z3 | 1.9L Engine(E36), 2.8L Engine(E36), Roadster 1.9L(E36), Roadster 2.8L(E36), Roadster(E36)
View related parts
BMW Z3 Washer Pump
Part Number: 61668360614
$75.41 MSRP: $92.40
You Save: $16.99 (19%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Wash Pump
- Replaced by: 61661377830
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 1996-2000 BMW Z3 | 1.9L Engine(E36), 2.8L Engine(E36), Roadster 1.9L(E36), Roadster 2.8L(E36), Roadster(E36)
View related parts
BMW Z3 Washer Pump
Part Number: 61678357839
Product Specifications
- Other Name: Wash Pumpe For Head Lamp Cleaning Device
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 1999-2002 BMW Z3 | Coupe(E36)

BMW Z3 Washer Pump

The BMW Washer Pump is responsible for ensuring that the road ahead is visible. It does this by injecting washer fluid from the reservoir to the spray nozzles. These spray nozzles bathe the windshield in washer fluid to enhance visibility. Fueled by a small electric motor, the Washer Pump generates sufficient pressure to drive the cleaning agent through narrow hoses and out of the twin nozzles positioned close to the hood, allowing dirt, bugs, and grime to be wiped clean with a quick flip of the wipers. During the BMW Z3 production runs, BMW applied a single fundamental pump design, so you won't find any significant differences in the shape of the housing and its mounting or electrical connection. There are only small yearly variations that do not affect how the Washer Pump does its job. A malfunctioning unit reveals itself when it silently activates or delivers dry squirts, signaling that replacement is needed. As a rule of thumb, owners budget, on top of the replacement part, a modest amount in labor charges. Z3 owners often remark that routine checks of the Z3 Washer Pump help detect leaks or low fluid before visibility suffers. The simple mechanism allows a new Washer Pump to restore clarity and confidence in driving quickly.

If you are looking for OEM BMW Z3 Washer Pump, we highly recommend to shop with us. Not only do we offer budget friendly prices, but we also provide fast delivery. In addition, we have a hassle-free return policy on all genuine BMW Z3 Washer Pump that come backed by the manufacturer's warranty.

BMW Z3 Washer Pump Parts Questions & Experts Answers

Washer Pump
67128362154
Q:
How to remove and install a windshield washer pump on BMW Z3?
Posted by Elder M.
A:
The rubber grommet seals and holds the windshield washer pump in place inside the washer reservoir. To remove it, begin by disconnecting its electrical connector. The wiper fluid container should be emptied or a drain pan used to collect any liquid that might be lost when the pump is taken off. If you are taking out the pump from the reservoir ensure that you take it out with caution so as not to damage the sealant grommet. Before you go ahead and install it back, examine carefully its sealing grommet made of rubber and if it has any cracks, brittleness or damage replace it outrightly. Finally lubricate this rubber grommet using washing fluid or even mild liquid soap product. Press both pick up and pump assembly into the reservoir ensuring they are fully seated. Lastly refill your reservoir then check for leaks of fluid on normal operation.
Answered by BMW Parts Specialist Javier / Sep 03, 2023