How to remove and install wiper blades and wiper arms on BMW Z3?

First you should lift the wiper arm to remove it. Then put a protective cloth on the windshield base. While at the same time, press and hold the release tab on the pivot of your blade towards its arm until it's free. In case you are replacing an insert, lower the wiper arm onto the cloth. A new blade is fitted by lifting upwards into a wiper arms until securely snaps pivoting clip into place. For removal of wiper arms, ensure that they are in park with ignition off. Take care when removing nut cover from wiper arm mounting or marking down spindle positions of both blades for correct adjustment in future. The next step is then to loosen and remove nut, then press down on this arm several times so as to detach it from mounting spindle. At last, grasp around the spindle and raise up until latching occurs before gently pulling out whole assembly of both blades together with this unit from its socket spot which holds it tight against coming off too soon without doing what is required: pushing once upon time again; hence just another way through other means than doing anything but instead only holding them over there until all parts come apart themselves - everything goes smoothly including getting them back into place afterwards because nothing else will be necessary beyond some more turning of knobs makes sure things fit perfectly well during reassembly process! Reinstall by aligning matchmarks made during disassembly, press down on wiper arms until they are completely seated on shafts and secure them using mount nuts and covers Put your engine on start, let it idle without electrical accessories engaged while wetting windshields before going full speed with which wipe dirty glass clean every time there's water drops no longer needed anymore as soon as possible if any contact happens between these components' edges has happened! When required move back & forward prior reinstalling tightening or adjusting where necessary.

Genuine BMW Z3 Wiper Blade

Windshield Wiper Blade

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Series

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Wiper Blades found

View related parts
BMW Z3 Wiper Blade Rubber
Part Number: 61618217711
$28.78 MSRP: $35.27
You Save: $6.49 (19%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Wiper Rubber; Insert
- Replaces: 61-61-8-217-674, 61-61-1-352-734, 61-61-1-378-772, 61-61-8-220-914, 61-61-8-360-095, 61-61-8-220-913, 61-61-1-383-431
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 1996-2002 BMW Z3 | 1.9L Engine(E36), 2.8L Engine(E36), Coupe(E36), Roadster 1.9L(E36), Roadster 2.5L(E36), Roadster 2.8L(E36), Roadster 3.0L(E36), Roadster(E36)
View related parts
BMW Z3 Wiper Blade Set
Part Number: 61619070581
$59.26 MSRP: $83.88
You Save: $24.62 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Set Of Wiper Blades; Wiper Blade
- Position: Driver Side
- Replaces: 61-61-8-389-573
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 1996-2002 BMW Z3 | 1.9L Engine(E36), 2.8L Engine(E36), Coupe(E36), Roadster 1.9L(E36), Roadster 2.5L(E36), Roadster 2.8L(E36), Roadster 3.0L(E36), Roadster(E36)
View related parts
BMW Z3 Right Wiper Blade
Part Number: 61611387678
$28.73 MSRP: $40.67
You Save: $11.94 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Wiper Blade Right; Blade, Wiper Blade
- Position: Passenger Side
- Replaces: 61-62-7-140-965, 61-61-9-061-907, 61-61-8-353-297, 61-61-1-372-555, 61-61-8-389-574
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 1996-2002 BMW Z3 | 1.9L Engine(E36), 2.8L Engine(E36), Coupe(E36), Roadster 1.9L(E36), Roadster 2.5L(E36), Roadster 2.8L(E36), Roadster 3.0L(E36), Roadster(E36)
View related parts
BMW Z3 Wiper Rubber
Part Number: 61618220913
$28.78 MSRP: $35.27
You Save: $6.49 (19%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Replaced by: 61618217711
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 1996-2002 BMW Z3 | 1.9L Engine(E36), 2.8L Engine(E36), Coupe(E36), Roadster 1.9L(E36), Roadster 2.5L(E36), Roadster 2.8L(E36), Roadster 3.0L(E36), Roadster(E36)
View related parts
BMW Z3 Wiper Blade
Part Number: 61627140956
$25.83 MSRP: $36.57
You Save: $10.74 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Rear Blade
- Replaces: 61-62-8-401-497
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 1999-2002 BMW Z3 | Coupe(E36)
View related parts
BMW Z3 Right Front
Part Number: 61618353297
$28.73 MSRP: $40.67
You Save: $11.94 (30%)
ADD TO CART
Product Specifications
- Other Name: Wiper Blade Co-Drivers Side
- Replaced by: 61611387678
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 1996-2002 BMW Z3 | 1.9L Engine(E36), 2.8L Engine(E36), Coupe(E36), Roadster 1.9L(E36), Roadster 2.5L(E36), Roadster 2.8L(E36), Roadster 3.0L(E36), Roadster(E36)
View related parts
BMW Z3 Driver Side Wiper Blade
Part Number: 61618389573
$59.26 MSRP: $83.88
You Save: $24.62 (30%)
ADD TO CART
Product Specifications
- Other Name: Wiper Blade Driver Side
- Replaced by: 61619070581
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 1996-2002 BMW Z3 | 1.9L Engine(E36), 2.8L Engine(E36), Coupe(E36), Roadster 1.9L(E36), Roadster 2.5L(E36), Roadster 2.8L(E36), Roadster 3.0L(E36), Roadster(E36)

BMW Z3 Wiper Blade

The Wiper Blade on the BMW Z3 clears the windshield to maintain safe forward visibility in rain, snow, or road spray. The Wiper Blade is mounted on the exterior glass, attached to a metal arm that swings back and forth under electric power, thereby sweeping a flexible rubber edge across the surface to remove water, ice, dirt, and other debris. Many passenger vehicles, including the BMW Z3, use two synchronized radial arms so that each Wiper Blade covers its assigned section of glass for full viewing range. An integrated washer system can spray fluid ahead of the Wiper Blade to help the rubber edge glide smoothly and dislodge stubborn grime. The wiping speed can usually be selected by the driver on a continuous or intermittent basis. As a result, the BMW Z3 wiping system can match changing weather conditions automatically, without any manual effort. It is a good idea to regularly check the rubber squeegee and the supporting structure as a worn Wiper Blade may streak or chatter, reducing the clear view that the BMW Z3 relies on.

If you are looking for OEM BMW Z3 Wiper Blade, we highly recommend to shop with us. Not only do we offer budget friendly prices, but we also provide fast delivery. In addition, we have a hassle-free return policy on all genuine BMW Z3 Wiper Blade that come backed by the manufacturer's warranty.

BMW Z3 Wiper Blade Parts Questions & Experts Answers

Wiper Blade Rubber
61618217711
Q: How to remove and install wiper blades and wiper arms on BMW Z3?
A:
First you should lift the wiper arm to remove it. Then put a protective cloth on the windshield base. While at the same time, press and hold the release tab on the pivot of your blade towards its arm until it's free. In case you are replacing an insert, lower the wiper arm onto the cloth. A new blade is fitted by lifting upwards into a wiper arms until securely snaps pivoting clip into place. For removal of wiper arms, ensure that they are in park with ignition off. Take care when removing nut cover from wiper arm mounting or marking down spindle positions of both blades for correct adjustment in future. The next step is then to loosen and remove nut, then press down on this arm several times so as to detach it from mounting spindle. At last, grasp around the spindle and raise up until latching occurs before gently pulling out whole assembly of both blades together with this unit from its socket spot which holds it tight against coming off too soon without doing what is required: pushing once upon time again; hence just another way through other means than doing anything but instead only holding them over there until all parts come apart themselves - everything goes smoothly including getting them back into place afterwards because nothing else will be necessary beyond some more turning of knobs makes sure things fit perfectly well during reassembly process! Reinstall by aligning matchmarks made during disassembly, press down on wiper arms until they are completely seated on shafts and secure them using mount nuts and covers Put your engine on start, let it idle without electrical accessories engaged while wetting windshields before going full speed with which wipe dirty glass clean every time there's water drops no longer needed anymore as soon as possible if any contact happens between these components' edges has happened! When required move back & forward prior reinstalling tightening or adjusting where necessary.