Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Contact Us Help Center
Make sure this part fits

BMW 33416752381 Drive Flange Hub

2003-2016 BMW 33-41-6-752-381

Customer Questions & Expert Answers (5)
BMW 33416752381 Drive Flange Hub
BMW 33416752381 Drive Flange Hub
  • Part Description
    Drive flange hub
  • Manufacturer
    BMW
Make sure this part fits
$118.41 MSRP: $167.53
You Save: $49.12 (30%)
Ships in 1-3 Business Days
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers

  • 33416752381 Drive Flange Hub is Ref No. 01 in the diagram below

    2007 BMW Z4 Drive Flange Hub Diagram for 33416752381
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts

  • Product Specifications

    BrandGenuine BMW
    Manufacturer Part Number33416752381
    Part DescriptionDrive flange hub
    Other NamesHub
    Item Weight4.80 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    Require Quantity2
    ManufacturerBMW
    SKU33416752381
    WarrantyThis genuine BMW part is guaranteed by BMW's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65

  • Vehicle Fitment

    Year Make Model Submodel
    2009-2011 BMW 323iSedan(E90)
    2009-2011 BMW 328iSedan N51 Engine(E90), Sedan N52 Engine(E90)
    2003-2016 BMW Z42.5i(E85), 3.0i(E85), Coupe 3.0si(E86), Roadster 3.0i(E85), Roadster 3.0si(E85), sDrive28i(E89), sDrive30i(E89), sDrive35i(E89), sDrive35is(E89)

  • Customer Questions & Expert Answers

    Q:
    Is this the part I need to replace my broken parts? Posted by BMWPartsDeal Specialist
    A:
    You can Select Your Vehicle to check if 33416752381 fits your vehicle.
    Posted by BMWPartsDeal Specialist
    Q:
    How do you remove and install the rear Wheel Hub on BMW Z4? Posted by Customer
    A:
    The hub assembly can only be removed if it or the hub bearing need to be replaced, as the hub is press fitted into the bearing's inner race, and taking it out damages the bearing. If removal is required then be ready with a new hub bearing at the time of replacing the same. For installation, it is necessary to use a long bolt or a threaded bar and suitable washers. First of all it is necessary to dismantle the specific driveaxle and the brake disc. Then use a slide hammer to pull out the hub from the bearing: if the bearing's inner race stays on the hub, the intervention of a puller will be required in this case. Lastly, as soon as the hub is then taken off, the next step is to put in the bearing. Light oil should be applied on the hub surface, and the later should be fitted into the bearing inner race. Screw the longer threaded bolt in both ends of the hub with two nuts and large washers such that the inner washer is in contact with the bearing inner race and the outer washer in contact with the hub. Again, do so until the hub gets fully seated and when doing so, do not use a hammer and drift, as it may damage bearings. Upon tightening of the nut or bolt, please unscrew the bolt or threaded bar and washers and ensure rotation of the hub bearing. Last but not the lest, replace the brake disc as well as the driveshaft back to their respective positions.
    Posted by BMWPartsDeal Specialist
    Q:
    How do you remove the front brake disc for the 2009 BMW 328i? Posted by Customer
    A:
    Unstake and remove the drive axle hub nut if working on an all-wheel drive model. Then, remove the four retaining bolts and the hub-and-bearing assembly.
    Posted by BMWPartsDeal Specialist
    See expert answers on similar Wheel Hub
    Q:
    Why should a hammer and drift not be used to knock the hub into position for the 2008 BMW 328i? Posted by Customer
    A:
    Using a hammer and drift can damage the bearing.
    Posted by BMWPartsDeal Specialist
    Q:
    Are wheel bearings available separately for the 2004 BMW Z4? Posted by Customer
    A:
    No, the wheel bearings are not available separately, so the hub and wheel bearing must be replaced as an assembly.
    Posted by BMWPartsDeal Specialist
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine BMW Part 33416752381, the Right Choice

To guarantee reliability, choose BMW part # 33416752381 Drive Flange Hub. It is also referred to as Wheel Hub. This genuine part is built directly by BMW under very rigorous testing and developed using reliable materials to tolerate years of heavy use and present long-lasting performance. This part fits 2009-2011 323i, 2009-2011 328i, 2003-2016 Z4.

BMWPartsDeal.com is a leading supplier of genuine BMW parts and accessories such as 33-41-6-752-381 Drive Flange Hub. Looking to get brand-new OEM BMW parts? Our prices are highly competitive, and we supply a wide range of quality genuine parts. Moreover, all the parts are accompanied by a manufacturer's warranty and a no-hassle return policy to support your convenience.

Why choose BMW Parts Deal

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly