How to remove and install the front crankshaft seal in V8 engine on 2005 BMW X5?

With the engine fully cooled off, remove the viscous clutch cooling fan, engine accessory belts, and crankshaft vibration damper and pulley, ensuring to mark the belts with their direction of rotation. Install the crankshaft protector cap using the special tool on the end of the crankshaft. Use the seal removal tool to make firm contact with the seal and tighten the center screw to draw out the seal. Coat the new seal with oil and use the special tool along with the crankshaft center bolt to draw the seal in flush with the timing case cover. Reinstall the crankshaft vibration damper using a new bolt, tightening it in four stages, and ensure proper alignment with the locating dowel pin in the hub. Complete the installation by reversing the removal process, including the installation of engine accessory belts and the cooling fan.

Genuine 2005 BMW X5 Crankshaft Seal

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Series

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Crankshaft Seals found

View related parts
2005 BMW X5 Shaft Seal
Part Number: 11147647381
$38.78 MSRP: $63.68
You Save: $24.90 (40%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Replaces: 11-14-7-558-914, 11-14-7-534-192, 11-14-7-524-312
- Item Weight: 0.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 11147647381
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following 2005 BMW X5 Submodels:
- 4.4i(E53), 4.8i(E70), 4.8is(E53), xDrive48i(E70), xDrive50i(E70)
View related parts
2005 BMW X5 Shaft Seal
Part Number: 11142249532
$91.31 MSRP: $97.36
You Save: $6.05 (7%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Item Weight: 0.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 11142249532
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following 2005 BMW X5 Submodels:
- 3.0i(E53)
View related parts
2005 BMW X5 Shaft Seal
Part Number: 11142249533
$91.31 MSRP: $97.36
You Save: $6.05 (7%)
ADD TO CART
Product Specifications
- Other Name: Front Crank Seal, Oil Seal, Rear Main Seal
- Replaces: 11-14-1-706-785, 11-14-2-245-364, 11-14-1-706-999, 11-14-2-193-237, 11-14-2-247-164
- Item Weight: 0.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 11142249533
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
More Info
Fits the following 2005 BMW X5 Submodels:
- 3.0i(E53)
View related parts
2005 BMW X5 Set Of Covers
Part Number: 11141438274
$121.97 MSRP: $167.00
You Save: $45.03 (27%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Rear Main Seal, Rear Main Seal Retainer, Retainer
- Replaces: 11-14-1-744-158, 11-14-1-433-897
- Item Weight: 0.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 11141438274
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
More Info
Fits the following 2005 BMW X5 Submodels:
- 3.0i(E53)

2005 BMW X5 Crankshaft Seal

Are you in need of a high-quality yet affordable OEM 2005 BMW X5 Crankshaft Seal? Look no further. Our website boasts an extensive selection of genuine 2005 BMW X5 Crankshaft Seal, all priced competitively. Plus, our top-notch customer service and speedy delivery options ensure a seamless shopping experience for you.

2005 BMW X5 Crankshaft Seal Parts Questions & Experts Answers

Q: How to remove and install the front crankshaft seal in V8 engine on 2005 BMW X5?
A: With the engine fully cooled off, remove the viscous clutch cooling fan, engine accessory belts, and crankshaft vibration damper and pulley, ensuring to mark the belts with their direction of rotation. Install the crankshaft protector cap using the special tool on the end of the crankshaft. Use the seal removal tool to make firm contact with the seal and tighten the center screw to draw out the seal. Coat the new seal with oil and use the special tool along with the crankshaft center bolt to draw the seal in flush with the timing case cover. Reinstall the crankshaft vibration damper using a new bolt, tightening it in four stages, and ensure proper alignment with the locating dowel pin in the hub. Complete the installation by reversing the removal process, including the installation of engine accessory belts and the cooling fan.