How to replace the knock sensors in V8 engine on BMW X5?

The V8 engines have knock sensors are fitted to the side of the cylinder block, although in the area of the intake manifold. First of all, remove the negative cable and put a cap on the battery terminal to avoid short circuits accidentally. The warning that has to be observed before disconnecting battery is as follows: Before you disconnect the sensor connectors, make sure that you label the sensor connectors, more importantly make sure that knock sensor harness connectors are not switched in order to avoid danger to the engine. After the engine has cooled down the intake manifold has to be removed, also the knock sensor mounting bolthe are on the sides of the cylinder block and have to be removed to take out the sensors. One has to point out the previously installed angle of the knock sensors to the block before the removal process in order to have them reinstalled correctly. Remove the contact surfaces of the engine block and sensors and clean them, torque the knock sensor fastener without overtightening. Upon reinstallation of the intake manifold, re-connect the electrical connectors of the sensor, and position the harnesses in their proper places. Last of all, look for fault codes and erase and reset the memory of ECM.

Genuine BMW X5 Knock Sensor

Engine Knock Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Series

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

10 Knock Sensors found

View related parts
BMW X5 Knock Sensor
Part Number: 13627598861
$44.43 MSRP: $62.90
You Save: $18.47 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Ping Sensor
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 2011-2025 BMW X5 | 8 Cyl 4.4 L GAS, 8 Cyl 4.4 L MILD HYBRID EV-GAS (MHEV), M50i(G05), xDrive40e(F15), xDrive50i(E70), xDrive50i(F15), xDrive50i(G05)
View related parts
BMW X5 Knock Sensor
Part Number: 13627568421
$139.25 MSRP: $184.70
You Save: $45.45 (25%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Ping Sensor
- Replaces: 12-14-1-709-317
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 2000-2010 BMW X5 | 4.4i(E53), 4.6is(E53), 4.8i(E70), 4.8is(E53), xDrive48i(E70)
View related parts
BMW X5 Engine Knock Ping Sensor
Part Number: 13627566785
$118.21 MSRP: $173.02
You Save: $54.81 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Ping Sensor; Knock Sensor
- Replaces: 13-62-7-525-039
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 2007-2010 BMW X5 | 3.0si(E70), xDrive30i(E70)
View related parts
BMW X5 Knock Sensor
Part Number: 13627566786
$118.21 MSRP: $173.02
You Save: $54.81 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Ping Sensor
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 2011-2018 BMW X5 | sDrive35i(F15), xDrive35i(E70), xDrive35i(F15)
View related parts
BMW X5 Knock Sensor
Part Number: 13627636937
$44.43 MSRP: $62.90
You Save: $18.47 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Ping Sensor
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 2019-2023 BMW X5 | 6 Cyl 3.0 L GAS, 6 Cyl 3.0 L PLUG-IN HYBRID EV-GAS (PHEV), xDrive40i(G05)
View related parts
BMW X5 Knock Sensor
Part Number: 13627577034
$53.32 MSRP: $75.48
You Save: $22.16 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Ping Sensor
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 2011-2013 BMW X5 | xDrive50i(E70)
View related parts
BMW X5 Knock Sensor
Part Number: 13627568422
$118.21 MSRP: $173.02
You Save: $54.81 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Ping Sensor
- Replaces: 12-14-1-435-485
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 2001-2006 BMW X5 | 3.0i(E53)
View related parts
BMW X5 Knock Sensor
Part Number: 12141435485
$118.21 MSRP: $173.02
You Save: $54.81 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Ping Sensor
- Replaced by: 13627568422
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 2001-2006 BMW X5 | 3.0i(E53)
View related parts
BMW X5 PING SENSOR
Part Number: 13629845632
$44.43 MSRP: $62.90
You Save: $18.47 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Knock Sensor
- Replaces: 13-62-9-845-731
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 2024-2025 BMW X5 | 6 Cyl 3.0 L MILD HYBRID EV-GAS (MHEV), 6 Cyl 3.0 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
BMW X5 Knock Sensor
Part Number: 12141709317
$139.25 MSRP: $184.70
You Save: $45.45 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Ping Sensor
- Replaced by: 13627568421
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 2004-2006 BMW X5 | 4.4i(E53), 4.8is(E53)

BMW X5 Knock Sensor

The purpose of the BMW X5 Knock Sensor is to protect the engine by detecting the occurrence of damaging spark knock and allowing the control computer to shift ignition timing before damage occurs. Mounted on the block, the Knock Sensor contains a piezoelectric element that converts the vibration from detonation into voltage, which is sampled in a constant feedback loop by the powertrain module. When knock does occur, timing is reduced in small increments. Combustion becomes stable, then timing slowly creeps forward again in a way that keeps the engine just about to the point of maximum power, economy, and low emissions, all advantages that every X5 driver can feel. Earlier BMW X5 models applied a single Knock Sensor monitoring the entire bank as opposed to multiple units that give the computer the opportunity to more finely tune different cylinders to provide quicker correction and smoother operation. Regardless of which generation, each BMW Knock Sensor works with information from crank and cam sensors to provide precise sparks without the delays of mechanical distributors. By preventing prolonged detonation, the level of protection the Knock Sensor affords helps the BMW X5 continue to perform strongly, even with lower octane fuel, as well as protecting the internals inside the engine.

If you are looking for OEM BMW X5 Knock Sensor, we highly recommend to shop with us. Not only do we offer budget friendly prices, but we also provide fast delivery. In addition, we have a hassle-free return policy on all genuine BMW X5 Knock Sensor that come backed by the manufacturer's warranty.

BMW X5 Knock Sensor Parts Questions & Experts Answers

Knock Sensor
13627568421
Q: How to replace the knock sensors in V8 engine on BMW X5?
A:
The V8 engines have knock sensors are fitted to the side of the cylinder block, although in the area of the intake manifold. First of all, remove the negative cable and put a cap on the battery terminal to avoid short circuits accidentally. The warning that has to be observed before disconnecting battery is as follows: Before you disconnect the sensor connectors, make sure that you label the sensor connectors, more importantly make sure that knock sensor harness connectors are not switched in order to avoid danger to the engine. After the engine has cooled down the intake manifold has to be removed, also the knock sensor mounting bolthe are on the sides of the cylinder block and have to be removed to take out the sensors. One has to point out the previously installed angle of the knock sensors to the block before the removal process in order to have them reinstalled correctly. Remove the contact surfaces of the engine block and sensors and clean them, torque the knock sensor fastener without overtightening. Upon reinstallation of the intake manifold, re-connect the electrical connectors of the sensor, and position the harnesses in their proper places. Last of all, look for fault codes and erase and reset the memory of ECM.