How do you properly remove and install a crankshaft sensor in V8 engine on BMW X5?

Ensure the ignition is OFF and raise the car, supporting it safely. Remove the front end reinforcement plate and detach the crankshaft position sensor electrical connector located in the right lower bell housing. Unbolt the sensor from the bell housing, taking care not to discard any spacer shims if they are present. The installation process is the reverse of removal; clean the mounting surface before installing the new sensor and reinstall any shims if applicable. If the flywheel is replaced, check the crankshaft position sensor for correct installation depth by rotating the engine until the flywheel pulse tooth is centered in the opening for the removed sensor. Measure the depth to the top of the tooth from the sensor mounting surface on the transmission and measure the length of the sensor tip. Subtract the sensor length from the distance to the flywheel pulse tooth from the mounting area on the transmission to determine the gap between the sensor and the flywheel. Use shims available from BMW to increase the gap as needed to meet specifications.

Genuine BMW X5 Crankshaft Position Sensor

Engine Crankshaft Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Series

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

13 Crankshaft Position Sensors found

View related parts
BMW X5 Pulse Generator, Crankshaft / Gearbox
Part Number: 13627525015
$119.68 MSRP: $175.17
You Save: $55.49 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pulse generator, crankshaft/gearbox; Crankshaft Position Sensor, Crankshaft Sensor
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 2007-2010 BMW X5 | 3.0si(E70), xDrive30i(E70)
View related parts
BMW X5 Crankshaft Position Sensor
Part Number: 13627595860
$91.29 MSRP: $131.38
You Save: $40.09 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Crankshaft Sensor
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 2016-2018 BMW X5 | xDrive40e(F15)
View related parts
BMW X5 Crankshaft Speed Sensor
Part Number: 13627639278
$143.10 MSRP: $189.81
You Save: $46.71 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Crankshaft Engine Speed Sensor
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 2004-2006 BMW X5 | 4.4i(E53), 4.8is(E53)
View related parts
BMW X5 Crankshaft Position Sensor
Part Number: 13627582842
$91.29 MSRP: $131.38
You Save: $40.09 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Crankshaft Sensor; Camshaft Position Sensor
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 2011-2018 BMW X5 | sDrive35i(F15), xDrive35i(E70), xDrive35i(F15)
View related parts
BMW X5 Crankshaft Position Sensor
Part Number: 13627628741
$86.96 MSRP: $125.16
You Save: $38.20 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Crankshaft Sensor
- Replaces: 13-62-8-673-788, 13-62-7-604-417
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 2014-2018 BMW X5 | xDrive50i(F15)
View related parts
BMW X5 Crankshaft Engine Speed Sensor
Part Number: 13627548995
$119.68 MSRP: $175.17
You Save: $55.49 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Crankshaft Position Sensor, Crankshaft Sensor
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 2007-2013 BMW X5 | 4.8i(E70), xDrive48i(E70), xDrive50i(E70)
View related parts
BMW X5 Crankshaft Position Sensor
Part Number: 12141433264
$223.89 MSRP: $296.97
You Save: $73.08 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pulse Generator, Crankshaft
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 2000-2003 BMW X5 | 4.4i(E53), 4.6is(E53)
View related parts
BMW X5 Engine Crankshaft Position Sensor
Part Number: 13627806782
$86.96 MSRP: $125.16
You Save: $38.20 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Crankshaft Sensor; Crankshaft Position Sensor
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 2014-2018 BMW X5 | xDrive35d(F15)
View related parts
BMW X5 Crankshaft Position Sensor
Part Number: 13628644376
$86.96 MSRP: $125.16
You Save: $38.20 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Crankshaft Sensor
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 2019-2024 BMW X5 | 6 Cyl 3.0 L GAS, 6 Cyl 3.0 L MILD HYBRID EV-GAS (MHEV), 6 Cyl 3.0 L PLUG-IN HYBRID EV-GAS (PHEV), 8 Cyl 4.4 L GAS, 8 Cyl 4.4 L MILD HYBRID EV-GAS (MHEV), xDrive40i(G05)
View related parts
BMW X5 Engine Crankshaft Position Sensor
Part Number: 13628623437
$86.96 MSRP: $125.16
You Save: $38.20 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Crankshaft Sensor; Crankshaft Position Sensor
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 2014-2024 BMW X5 | 6 Cyl 3.0 L GAS, 6 Cyl 3.0 L MILD HYBRID EV-GAS (MHEV), 6 Cyl 3.0 L PLUG-IN HYBRID EV-GAS (PHEV), 8 Cyl 4.4 L GAS, 8 Cyl 4.4 L MILD HYBRID EV-GAS (MHEV), M50i(G05), xDrive50i(F15), xDrive50i(G05)
View related parts
BMW X5 Crankshaft Position Sensor
Part Number: 13628673788
$86.96 MSRP: $125.16
You Save: $38.20 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Crankshaft Sensor
- Replaced by: 13627628741
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 2014-2018 BMW X5 | xDrive50i(F15)
View related parts
BMW X5 Crankshaft Position Sensor
Part Number: 13627809334
$323.87 MSRP: $374.72
You Save: $50.85 (14%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Crankshaft Sensor
- Replaces: 13-62-7-787-192
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 2009-2013 BMW X5 | xDrive35d(E70)
View related parts
BMW X5 Crankshaft Position Sensor
Part Number: 12141709616
$165.99 MSRP: $220.17
You Save: $54.18 (25%)
Product Specifications
- Other Name: Pulse Generator, Crankshaft; Crankshaft Sensor
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 2001-2006 BMW X5 | 3.0i(E53)

BMW X5 Crankshaft Position Sensor

The BMW X5 Crankshaft Position Sensor is among the vital components to the BMW X5 generating considerable performance and dependability to these automobiles. This sensor is every careful in its function to detect the position and rotational speed of the crankshaft and feeds this information to powertrain control module. Due to the precise ignition timing and fuel injection accomplished by the BMW X5 Crankshaft Position Sensor, the operation of the engine reaches its optimal capacity, thus creating more room for performance and security. Applicable to the E53, F15, and G05 generations of the BMW X5, this sensor is tailored for each generation as an embodiment of the company's quality and innovation. The availability of enhanced types of sensors including the Hall effect and magnetoresistive sensors underlines the dependability of the BMW X5 Crankshaft Position Sensor in the automotive business across the globe. The Crankshaft Position Sensor is consequently vital to the function of the automobile since a damaged one can cause limitations in the starting process and other related problems with the functioning of the engine. Being made of strong metal and finely designed and developed, the BMW X5 Crankshaft Position Sensor means not just enhanced efficiency of the engine but also the safety of the vehicle. When BMW further develops the X5 line, the Crankshaft Position Sensor remains to be one of the significant foundations of the company's quality and its quest to excel in the competitive SUV market.

If you are looking for OEM BMW X5 Crankshaft Position Sensor, we highly recommend to shop with us. Not only do we offer budget friendly prices, but we also provide fast delivery. In addition, we have a hassle-free return policy on all genuine BMW X5 Crankshaft Position Sensor that come backed by the manufacturer's warranty.

BMW X5 Crankshaft Position Sensor Parts Questions & Experts Answers

Crankshaft Speed Sensor
13627639278
Q: How do you properly remove and install a crankshaft sensor in V8 engine on BMW X5?
A:
Ensure the ignition is OFF and raise the car, supporting it safely. Remove the front end reinforcement plate and detach the crankshaft position sensor electrical connector located in the right lower bell housing. Unbolt the sensor from the bell housing, taking care not to discard any spacer shims if they are present. The installation process is the reverse of removal; clean the mounting surface before installing the new sensor and reinstall any shims if applicable. If the flywheel is replaced, check the crankshaft position sensor for correct installation depth by rotating the engine until the flywheel pulse tooth is centered in the opening for the removed sensor. Measure the depth to the top of the tooth from the sensor mounting surface on the transmission and measure the length of the sensor tip. Subtract the sensor length from the distance to the flywheel pulse tooth from the mounting area on the transmission to determine the gap between the sensor and the flywheel. Use shims available from BMW to increase the gap as needed to meet specifications.