How to remove and install the oil pump on BMW Z3?

Disconnect the negative battery cable before removing the oil pump. For the S14 engine, remove the oil pan, sprocket mounting nut, and oil pump. Install by tightening the pump-to-block bolts, placing the pump drive chain around the sprocket, and adding shims if needed. For the M20 engine, remove the oil pan and oil pump, then inspect and replace the driveshaft bearing before installing the gear and cover. For the M42 and M44 engines, drain the oil, and remove the timing case cover and oil pump. Clean the mounting surfaces, replace the gasket, and install the timing case.

Genuine BMW Z3 Oil Pump

Oil Fluid Pump

Enter your vehicle info to find more parts and verify fitment

Select Vehicle by VIN
Select Vehicle by Model

Select by VIN

Enter your VIN for the most accurate results.

Select by Model

-- Select Series --

-- Select Model --

-- Select Year --

3 Oil Pumps found

View related parts
BMW Z3 Oil Pump
Part Number: 11417501568
$556.62 MSRP: $667.60
You Save: $110.98 (17%)

Add to Cart
Product Specifications
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
View More
Fits the following Vehicles:
- 1997-2002 BMW Z3 | 2.8L Engine(E36), Coupe(E36), Roadster 2.5L(E36), Roadster 2.8L(E36), Roadster 3.0L(E36)
View related parts
BMW Z3 Oil Pump
Part Number: 11411748153
$781.14 MSRP: $1006.81
You Save: $225.67 (23%)

Add to Cart
Product Specifications
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
View More
Fits the following Vehicles:
- 1997-2000 BMW Z3 | 2.8L Engine(E36), Roadster 2.8L(E36)
View related parts
BMW Z3 Oil Pump
Part Number: 11417507350
$420.60 MSRP: $620.86
You Save: $200.26 (33%)

Add to Cart
Product Specifications
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
View More
Fits the following Vehicles:
- 1997-2000 BMW Z3 | 2.8L Engine(E36), Coupe(E36), Roadster 2.5L(E36), Roadster 2.8L(E36)

BMW Z3 Oil Pump Parts Questions & Answers

Oil Pump
11-41-1-748-153
Q: How to remove and install the oil pump on BMW Z3?
A: Disconnect the negative battery cable before removing the oil pump. For the S14 engine, remove the Oil Pan, sprocket mounting nut, and oil pump. Install by tightening the pump-to-block bolts, placing the pump drive chain around the sprocket, and adding shims if needed. For the M20 engine, remove the oil pan and oil pump, then inspect and replace the driveshaft bearing before installing the gear and cover. For the M42 and M44 engines, drain the oil, and remove the timing case cover and oil pump. Clean the mounting surfaces, replace the gasket, and install the timing case.

Related BMW Z3 Parts

Browse by Year

2002 Oil Pump 2001 Oil Pump 2000 Oil Pump 1999 Oil Pump 1998 Oil Pump 1997 Oil Pump