Jack up the car and secure it properly and you have to take off the splash shield from underneath the car. Empty the car of coolant and unscrew the fan shroud. Open the coolant cap, and unscrew the securing clip and image the coolant hose from the reservoir. For turbo models only: loosen the clamp on the charge-air duct and take off the duct. for ATF heat exchanger: loose the bolts and remove the approved hose for the automatic transmission. Take out the bolts and screws and slowly lift the radiator vertically and out of the car's compartment. When done installing ensure that the radiator fits well on the lower mounts, the electric cooling fan cowl clicks into the bottom, fill the cooling system and then bleed it, look out for any sign of leakage.