How to remove and install Turn Signal Switch on BMW Z3?

Whenever working near any of the SRS components, such as the impact sensors, the air bag module, steering column, and instrument panel, disable the SRS. For E3D Models: If equipped, disarm the SRS and disconnect the negative battery terminal. Remove the steering wheel, the trim panel at the bottom left of the instrument panel, and the lower steering column casing. Remove the screws holding the switch, take out the switch, and disconnect the plug. When installing, position the switch back, ensuring the ground wire is connected and the retainers fit into their respective holes, reconnect the plug, replace the trim panels and steering wheel, and reconnect the negative battery terminal. For E36 Models: If equipped, disarm the SRS and disconnect the negative battery terminal. Take off the lower dashboard trim panel on the left and the lower section of the steering column casing. Remove the steering wheel, then remove the screw and compress the clip to release the switch, followed by disconnecting the plug. To install, reposition the switch and reconnect the plug, put back the steering wheel and trim panels, and reconnect the negative battery cable, making sure to arm the SRS afterward.

Genuine BMW Z3 Turn Signal Switch

Turn Signal Indicator Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Series

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Turn Signal Switches found

View related parts
BMW Z3 Dip-Dim Control Turn Signal Switch
Part Number: 61316904792
$328.83 MSRP: $360.94
You Save: $32.11 (9%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Turn Signal,Dip-Dim Control; Signal Switch
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 1996-2002 BMW Z3 | 1.9L Engine(E36), 2.8L Engine(E36), Coupe(E36), Roadster 1.9L(E36), Roadster 2.5L(E36), Roadster 2.8L(E36), Roadster 3.0L(E36), Roadster(E36)
View related parts
BMW Z3 Dip-Dim Control Turn Signal Switch
Part Number: 61318360913
$328.83 MSRP: $360.94
You Save: $32.11 (9%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Turn Signal,Dip-Dim Control; Signal Switch, Turn Signal Switch
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 1996-2000 BMW Z3 | 1.9L Engine(E36), 2.8L Engine(E36), Coupe(E36), Roadster 1.9L(E36), Roadster 2.5L(E36), Roadster 2.8L(E36), Roadster(E36)
View related parts
BMW Z3 Dip-Dim Control Turn Signal Switch
Part Number: 61318360905
$308.49 MSRP: $338.62
You Save: $30.13 (9%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Turn Signal,Dip-Dim Control; Signal Switch
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 1996-2000 BMW Z3 | 1.9L Engine(E36), 2.8L Engine(E36), Coupe(E36), Roadster 1.9L(E36), Roadster 2.5L(E36), Roadster 2.8L(E36), Roadster(E36)
View related parts
BMW Z3 Dip-Dim Control Turn Signal Switch
Part Number: 61316904793
Product Specifications
- Other Name: Switch Turn Signal,Dip-Dim Control; Signal Switch, Turn Signal Switch
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 1996-2002 BMW Z3 | 1.9L Engine(E36), 2.8L Engine(E36), Coupe(E36), Roadster 1.9L(E36), Roadster 2.5L(E36), Roadster 2.8L(E36), Roadster 3.0L(E36), Roadster(E36)
View related parts
BMW Z3 Dip-Dim Control Turn Signal Switch
Part Number: 61318360911
Product Specifications
- Other Name: Switch Turn Signal,Dip-Dim Control
- Warranty: This genuine part is guaranteed by BMW's factory warranty.
Fits the following Vehicles:
- 1996-2000 BMW Z3 | 1.9L Engine(E36), 2.8L Engine(E36), Coupe(E36), Roadster 1.9L(E36), Roadster 2.5L(E36), Roadster 2.8L(E36), Roadster(E36)

BMW Z3 Turn Signal Switch

BMW Z3 Turn Signal Switch is the driver's quick communication tool to let the world know which way the iconic BMW roadster wishes to go while having the driver's hands close to the wheel. Mounted on the steering column, the Turn Signal Switch is a spring-loaded lever that, when tapped up or down, completes an electric circuit that flashes the front and rear indicator lamps until the wheel self-cancels or the driver returns the lever to center. Beyond functioning as a signal for left and right, the Turn Signal Switch on many BMW Z3 editions also contains slide or twist dials for headlights, fog lamps, windshield-wiper speeds, and even cruise control, which bundles several of a vehicle's lighting and comfort features into a single stalk. Early Z3 cars were based on a simpler Turn Signal Switch dedicated almost entirely to blinkers, but in later facelifts, a multifunction stalk was applied, the main difference being the addition of the functions of the auxiliary controls and a greater strength to the internal contact plate intended to deal with greater electrical loads. Regardless of version, a responsive Turn Signal Switch is crucial to roadway safety and compliance with laws.

If you are looking for OEM BMW Z3 Turn Signal Switch, we highly recommend to shop with us. Not only do we offer budget friendly prices, but we also provide fast delivery. In addition, we have a hassle-free return policy on all genuine BMW Z3 Turn Signal Switch that come backed by the manufacturer's warranty.

BMW Z3 Turn Signal Switch Parts Questions & Experts Answers

Dip-Dim Control Turn Signal Switch
61318360913
Q:
How to remove and install Turn Signal Switch on BMW Z3?
Posted by Dalton A.
A:
Whenever working near any of the SRS components, such as the impact sensors, the air bag module, steering column, and instrument panel, disable the SRS. For E3D Models: If equipped, disarm the SRS and disconnect the negative battery terminal. Remove the steering wheel, the trim panel at the bottom left of the instrument panel, and the lower steering column casing. Remove the screws holding the switch, take out the switch, and disconnect the plug. When installing, position the switch back, ensuring the ground wire is connected and the retainers fit into their respective holes, reconnect the plug, replace the trim panels and steering wheel, and reconnect the negative battery terminal. For E36 Models: If equipped, disarm the SRS and disconnect the negative battery terminal. Take off the lower dashboard trim panel on the left and the lower section of the steering column casing. Remove the steering wheel, then remove the screw and compress the clip to release the switch, followed by disconnecting the plug. To install, reposition the switch and reconnect the plug, put back the steering wheel and trim panels, and reconnect the negative battery cable, making sure to arm the SRS afterward.
Answered by BMW Parts Specialist Koleman / Jan 29, 2022